wondered how long that would takeOriginally Posted by leo_bsb
wondered how long that would take
Yes anodised aluminum. I have been using it for 2 years now in various setups. Never had any problems with the copper parts if that is what you mean.
Aluminium reservoir is not a problem if tou have cooling liquid instead of water. Cooling liquid has in it a negative catalyst to avoid corrosion.wondered how long that would take
The same situation is with anodised aluminum.
your right lyl ill post some picks of her inside today. Just realized that after i read your post.
Some miscellaneous pictures of my old setup on different hardware... Still waiting for parts on the new one. Needless to say i'm anti-high-flow
ASUS Sabertooth P67B3· nVidia GTX580 1536MB PhysX · Intel Core i7 2600K 4.5GHz · Corsair TX850W · Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 · OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB · Corsair 650D · DELL U2711 27"
You said it Captain ElbowsNeedless to say i'm anti-high-flow. It does look pretty though. The green . .. .
EDIT : Holy cow is that 10mm ID tubing?
Last edited by MomijiTMO; 07-09-2008 at 04:54 AM.
Heh, yeah elbows-r-us in there
Next system will be different, way less restrictive and with pneumatic connectors. Poor LAING cannot show its potential there
EDIT: No, it's not 10/8 tubing, it's EVEN LESS 8/6 tubing. Don't really feel the need for high-flow as the temperatures are as low. Why take chances with pressure?
Last edited by NaMcO; 07-09-2008 at 05:27 AM.
ASUS Sabertooth P67B3· nVidia GTX580 1536MB PhysX · Intel Core i7 2600K 4.5GHz · Corsair TX850W · Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 · OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB · Corsair 650D · DELL U2711 27"
does anybody else see drinking straws? hehe
[ Lian-Li V1000B // EP45-UD3P // E8400 // HD4870 ]
[ W/C by EK, MIPS, D-tek, Bitspower, Swiftech, XSPC]
[ Project LucentTide - WORKLOG! ]
Hehe, that is alot of elbows!
My new project - Koen Server:
Mod Log can be found here
I agree in some degree. My watercooling temps are the same whether the pump is insatiably loud at high, or at the air is louder 1.Heh, yeah elbows-r-us in there
Next system will be different, way less restrictive and with pneumatic connectors. Poor LAING cannot show its potential there
EDIT: No, it's not 10/8 tubing, it's EVEN LESS 8/6 tubing. Don't really feel the need for high-flow as the temperatures are as low. Why take chances with pressure?
i5 750 @ 3.2 Ghz, stock volts on stock cooling
4GB G.Skill DDR3-1600 7-7-7-21
Gigabyte P55-DS2
EVGA GTX260 192shader
That's very red.
Mmm wait til I put the Green lights in!That's very red
I am glad you are happy with your temperatures.. I don't see why you use SO many elbows though. Why do you use them in places that they aren't needed at all? Elbows are supposed to be used only when 100% necessary.
Nergal: Coolermaster Stacker STC-01, Gigabyte 990FXA-UD7 w/ EK Waterblock, AMD Phenom x6 1090T @ (4.1GHz, 2400MHz HT-Link, 3000MHz CPU-NB) w/ Swiftech Apogee XT, G.SKILL Ripjaws X F3-17000CL11Q-16GBXL (4x4GB) @ 7-8-8-24 1600MHz, 3x Radeon 5870 (2 w/ Swiftech MCW-82, 1 w/ Zalman VF3000A), OCZ X3 2000w, 2x Samsung Spinpoint F3 1TB 7200RPM in RAID1, 4x Seagate Barracuda 2TB 5900RPM in RAID10, ASUS Xonar Essence STX, Swiftech MCR320-QP Radiator, Swiftech MCP655-B Pump, Windows Server 2008 R2
Death: Antec One Hundred Ice, Gigabyte 990FXA-UD5, Phenom x4 840 @ 4GHz, G.SKILL Ripjaws F3-10666CL7D-4GBRH (2x2GB), Gigabyte Radeon 5870 under Zalman VF3000A, XFX Radeon 5850, Asus 5850 DirectCU, 1TB Samsung Spinpoint F1 7200RPM(Windows 7 Enterprise), Western Digital Raptor 150GB (CentOS 6.2)
Finally redid mine. Still crappy wire management.
All you guysing at NaMcO for the elbows really should try using the fittings and tubing he is before opening your mouths. PUR is much stiffer than anything the "barb" or "compression" crowd uses. It feels nice and flexible outside the case but then it does something weird when you try to put it in......it doesn't bend very well......how do I know? It's what I use for most of my builds.
http://www.xtremesystems.org/forums/...postcount=9056
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
@ Freebo
Great case great desing
@ l33t p1mp
More wire managment pls...
@Freebo
I was watching your pictures from the bottom and thought "ohh im not the only one still using this aged dfi lp4 mb", then I looked at the note and the "Koen Server" made me confused lol
Btw Its my first post on these forums so Hello Everyone
Here are some pics of my current setup:
Looking good. I like how you mounted the rad.
[QUOTE=Koen;3129385]@Freebo
I was watching your pictures from the bottom and thought "ohh im not the only one still using this aged dfi lp4 mb", then I looked at the note and the "Koen Server" made me confused lol
Btw Its my first post on these forums so Hello Everyone
looks great
custom case
I7 2600
GIGABYTE P67A-UD7 b3
8gb gskill ripjaw 1333 ram
Samsung f3 1tb hdd
my first custom case build
That's why I like Chieftech cases
@ Koen
Very good build and can I ask what is your pump?
it's a D5 with the "industrial type" (brass) topThat's why I like Chieftech cases
@ Koen
Very good build and can I ask what is your pump?
edit: my bad I just had a closer look at Koen's pics...it's a completely different pump
Last edited by Logos; 07-10-2008 at 04:15 AM.
[SIGPIC][/SIGPIC]
No, it's CWU pump used in the central heating of the house (230V)
It's very quiet pump
We'll Keep the Red Flag flying high - Because Man United will never die
Central heating . .. . . what's that? I'm glad it never goes below zero here
I like the look of the pump in question. Send it to Martin lol
lol you're right...just had a closer look at the pics and I edited my postNo, it's CWU pump used in the central heating of the house (230V)
It's very quiet pump
[SIGPIC][/SIGPIC]
Im really confused but oh well, the Pump in Koen Server is a 12V Laing DDC-1T Pro 10W with the XSPC Pumptop/res. Basicly all Koen Server is is my old case with a load of my old components (from when I had my S939 stuff) its a little side project ive started after doing my Koen CCXR project.
Posting Permissions
Bookmarks