Water Cooled Case Gallery

[CyberDruid]

lol

I've sold three so far but w/e...I just want to keep tinkering and create the PERFECT tech station

[taylormsj]

[lyl]

lol, does anyone read D-tek manuals?

I'm assuming most of you disregarded block orientation for good reasons. No harsh criticisms here.

[taylormsj]

Please tell me how the outlet being on the left makes any difference from it being on the right?

As long as the 'outlet is placed at the top when the computer is upright' (taken from manual) the orientation is fine

[C38368]

How is that orientation incorrect? D-TEK's manuals both say to position the outlet barb on the top to help with bleeding, but aside from making the D-TEK logo sit square to the world, there is no compelling reason not to turn it 90° in one direction, depending on the way the motherboard mounts...

[lyl]

Haha, I know guys. (ie "no harsh criticisms"). I agree, logically it does not matter as long as outlet is on top. I'm mainly referring to completely flipped ones I've been seeing lately.

aside from making the D-TEK logo sit square to the world

i like the way you worded that

[K3nii]

Here's my new CM690

[silverphoenix]

^^

did you post right after lyl's post on purpose??

[taylormsj]

HAHA omg

[Lagaaja]

Perfect timing lol

[solu]

Where is my good old armor case hope u like it.

[Logos]

@ Solu: top of your case is absolutely beautiful, good job

[solu]

Thx Logos4

[lyl]

^^

did you post right after lyl's post on purpose??

HAHA omg

Perfect timing lol

at least i dont feel as much of an ass anymore

[mib]

Hello to everybody.

Here are some pictures of my watercooling setups

There few of them and another one is coming soon.
1. Chieftec case.

The setup was DFI LanParty nF4 with X2, 1GB ram and X1800GTO@XTX

2. TT Matrix case

TT Matrix case, (not so good for WC/LC setups, too small)





3. CM 690

It's last revision before changing PC







4. BETA CM Stacker case

There was a change in case and in PC.

C2d e6300@3GHZ, DFI p35LT 4GB 1000MHz, X1950pro









Waterblocks are from www.watercooling.com.pl
F3D cpu
F2NB NB&SB
F2GPU
rad 2*120mm with Fander fans
Liang with OClabs
O-tank 250mm

There is a lot of work to do with that setup:
-painting, cable management, some modifications for case.

[rafwlkp]

mib fatter tubes please ! And u right...correct cable management mate
Keep going ^^

[mib]

mib fatter tubes please ! And u right...correct cable management mate
Keep going ^^

Fat tubes?? I don't like fat stuff :P

I did'n think about fatter tubes.
Waiting for other opinion.

PS Nice sig :d Red Devil fan :d

[rafwlkp]

I did'n think about fatter tubes.

So do it In this LC it will be look very nice.

PS Nice sig :d Red Devil fan :d

Oh yeah, I'm RED DEVIL's Fan And I'm proud of it

[Daidalos]

Just finished my watercooling setup a couple of days ago. Hope you like it.

[Arni]

Hi mib fajnego masz sponsora

[taylormsj]

I cant belive it, 2 systems in the last two pages with bad fusion orientation just after it was mentioned,

Daidalos : I think you should rotate your block, it will help bleed air bubbles and stop air getting trapped inside, i like your set up though

[Daidalos]

@taylormsj: I know about the orientation but the system bleed completed with no issues. This position helps have a cleaner look i think.

[contractk]

some pics of the outside of my build. not sure what to do about the graphics loop. put my 8800gt under water until the 4870x2 comes out or wait.

also should i go for a different shade of blue or a different colour

[lyl]

some pics of the outside of my build. not sure what to do about the graphics loop. put my 8800gt under water until the 4870x2 comes out or wait.

also should i go for a different shade of blue or a different colour

show more pics of the inside, we can barely tell what you have going on there. such a nice case. id wait out the 4870x2.

is your pump hanging?

[leo_bsb]

Are you using an aluminum reservoir?