E8500 5.9G 3D Benchable with Biostar TP45 HP

[G H Z]

Is this for real?

Very impressive NewBeetle, how far can you overclock a Dell?

[Gautam]

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

[dinos22]

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

my board doesn't turn on properly even with cleared cmos and there is no chance i can even OC with GX2 installed
very disappointed atm

i was testing RAM efficiency and this board is super fast

i did a 12m flat time at 3627MHz EEEEEEK
http://img393.imageshack.us/img393/9...63at362po5.png

[Fr3ak]

Impressive results Mitsuaki-san !

I am stuck at about 600 MHz FSB, because of my weak CPU, but I was able to run very high memory speeds with eh Tpower I45. Did you do any memory testing with your setup? With your high FSB, there is probably no need to test max mem speed using dividers, hehe

[Vivi]

Awesome!!
that is sick.
i dont know what biostar is doing but it is working. thanks for the mods aswel.

[NewBeetle]

very nice benching as always newbeetle-san! cant wait to see your 4870's in CF!! Good luck on your next runs!

Thank you, TheKarmakazi-san.
I had a quick test of ASUS P5Q-E.
It works well with 3870's in CF.
Therefore, the test of 4870's CF will become a little more previously.

Impressive work from you Mitsuaki-san!

I'm waiting your 4870 CF runs

Thank you, SF3D-san.
But I have not got 4870s yet in Japan....
Please wait my 4870 CF runs for a while.

oh i see...that explains things better

if you don't mind i would like to suggest that you try to boot at 600MHz FSB instead of 570
i found that when i boot at 590(haven't tried 570) my superpi is VERY slow...........but when i boot at 600 it's VERY fast

strange but it works heh

maybe you will be the first man to go below 1m 40s
that CPU is awesome...... 5.9Ghz with 1.85v is really special ....special CPU and special OCer is pure nerd sex on the beach

Thank you so much for your advice, dinos22-san.
And your 32M run @ 3.6G is very fantastic!
I will challenge below 1m 40s run of SPi-8M.

Is this for real?

Very impressive NewBeetle, how far can you overclock a Dell?

Thank you always, my friend G H Z-san.
I love a Dell, too.
If you send it to me, I will overclock it to the moon.

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

Thank you for your advice, Gautam-san.
It seems that current Biostar P45's BIOS has PCI-E compatibility problems.
I hope new BIOS can work well with Dual GPU system.

Impressive results Mitsuaki-san !

I am stuck at about 600 MHz FSB, because of my weak CPU, but I was able to run very high memory speeds with eh Tpower I45. Did you do any memory testing with your setup? With your high FSB, there is probably no need to test max mem speed using dividers, hehe

Thank you so much, Fr3ak-san.
I tested MAX memory speed @ 2:3 dividers.
I can run Spi-1M @ 709.9MHz.
CPU-Z Validation is 724.9MHz.
Biostar P45 mobo is very high memory speed!

Awesome!!
that is sick.
i dont know what biostar is doing but it is working. thanks for the mods aswel.

Thank you, Vivi2-san.
I strongly recommend this mobo.

DEWA DEWA
NewBeetle

[dinos22]

your notes helped me gain extra FSB thank you
with 570 boot and pmem tweaks it's very fast but i get to run at higher FSB than 600boot

below 1m40s will be amazing
i hope you will also challenge 32M W.R. soon but maybe that CPU will also go to 6GHz

[NewBeetle]

your notes helped me gain extra FSB thank you
with 570 boot and pmem tweaks it's very fast but i get to run at higher FSB than 600boot

below 1m40s will be amazing
i hope you will also challenge 32M W.R. soon but maybe that CPU will also go to 6GHz

My E8500 has the possiblity 32M benching @ 6G.
But pmem tweaks is very difficult for me.
I will need much time to take new WR.

[Oliver]

Mitsuaki Tanaka-tan u really have a e85 gem...

[c1rcu1tburn3r]

Great work NB-san, i'll wait some wr from you with p45 chipset

[dinos22]

My E8500 has the possiblity 32M benching @ 6G.
But pmem tweaks is very difficult for me.
I will need much time to take new WR.

wow dude i can't wait to see that
this board is around efficiency of DDR3 boards pretty much....at least all the W.R. holders

the fact you are benchmarking and at such speed we will see first sub 8m time for sure

go go go NB-san

[gundamit]

Great stuff as usual! Nice to see the 2 8x PCI-E lanes aren't hurting.

I'm also glad I'm not the only one seeing "Disabled (Crossfire Available)" in GPU-Z despite the fact Crossfire is obviously working. I'm seeing the same thing with my 4850s. Not a big deal but kind of irritating.

[NewBeetle]

Mitsuaki Tanaka-tan u really have a e85 gem...

Thank you always, Oliver-san.
Today, I tested "P965 Strap Tweker" under LN2 Pi Bench.
I take new WR to me (maybe).....

Great work NB-san, i'll wait some wr from you with p45 chipset

Thank you, c1rcu1tburn3r-san.
Perhaps, I take new modPi 8M WR by this E8500 and mobo.

wow dude i can't wait to see that
this board is around efficiency of DDR3 boards pretty much....at least all the W.R. holders

the fact you are benchmarking and at such speed we will see first sub 8m time for sure

go go go NB-san

Thank you so much for your advice, dinos22-san.
modPi 8M is OK.
But 32M is N.G.
My Team memory is almost breaking because it was overworked too much.

Great stuff as usual! Nice to see the 2 8x PCI-E lanes aren't hurting.

I'm also glad I'm not the only one seeing "Disabled (Crossfire Available)" in GPU-Z despite the fact Crossfire is obviously working. I'm seeing the same thing with my 4850s. Not a big deal but kind of irritating.

Thank you, gundamit-san.
CPU-Z shows some wrong informations.
But I don't mind.....

DEWA DEWA
NewBeetle

[NewBeetle]

nioce push Newbeetle-san, love to see some 3D at that speed.

Thank you so much, FUGGER-san.
I will show you some 3D at this speed in a few days.

I'm very sorry, FUGGER-san.
I cannot show you any 3D at that speed.....

Today my system has some troubles.
I can run only 5.85G 3D Bench....
Next I will challenge over 6GHz 3D bench.

3DMARK05 : 37351 CPU/GPU/Mem/PCI-E : 5762.9MHz/775MHz/1055MHz/100MHz


3DMARK05 : 37620 CPU/GPU/Mem/PCI-E : 5849.2MHz/775MHz/1055MHz/100MHz


Setup

[harleybro]

NewBeetle you are a master! I always look forward to seeing posts and results from you.

[DMH]

Great scores,congrat's

[NewBeetle]

NewBeetle you are a master! I always look forward to seeing posts and results from you.

Thank you, harleybro-san.
Please look at my new Thread.

Great scores,congrat's

Thank you always, DMH-san.
At last I can join the 6G 3D bench Club.

DEWA DEWA
NewBeetle

[pH(x)]

Good work NewBeetle-san

I like your CPU pot retention mechanism

[NewBeetle]

Good work NewBeetle-san

I like your CPU pot retention mechanism

Thank you, pH(x)-san.
The CPU pot retention mechanism is designed by Vigor who is a legendary Japanese OC'er.

DEWA DEWA