Quote Originally Posted by Marios View Post
In case you have Vista and a large perpendicular hard disk (over 700GB) could you please check whether you get errors from your hard disks?

This is the way to check.
Press Start type cmd.exe press enter.
Type winsat disk -flush -drive C.
You may change the letter C to the letter of the hard disk you want to check.
You should get a success response. If not please report back here and go on reading.

In case you did not get a success response, and you have large perpendicular hard disks in any form of raid with the latest Nvidia Nforce drivers installed, check for hard disk errors (nvstor or nvstor64 error) in your event viewer - custom views - Administrative events.

A parity error was detected on \Device\RaidPort1.
I did not pass with either my single 1TB WD or My RAID 1TB array. It did pass on my 2 150 raptors array. I do not have any errors in event viewer pertaining to hard drives or controllers. I just copied the contents of the Western digital (465GB) to the RAID drives last night. I expected Event Viewer errors like in the 680i early days but found none. I am using 15.15 drivers on my MSI P7N diamond 780i ATM. I did not experience any issues with the Striker either.