"ASUS P5Q Deluxe discussion".

[Leeghoofd]

The fan that they give for watercooling setups. I would eventually keep it but do put something on the northbridge.

NB doesn't get hot at all even with zero airflow... most only need 1.2-1.28Nb voltage for high FSB action...

Way to go Cob!! Awesome FSB on stock volts.

Lee - I saw a few additional settings in the BIOS then the ones you had mentioned in your recommendation.

CPU Ratio Setting: Manual
CPU VID: Default
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled

For more ram performance set AI transaction booster to MANUAL and try 2 settings below the auto setting... eg if auto is 13 try to boot with 11 and run eg Superpi 32M, if all okay set again one lower...

eg I tested with 400FSB and 1003 ram you can expect 7-8 PL, for 425FSB and ram at 850 expect 9-10...