Dust shouldnt matter cuz thats exhaust..
Only put them on the intake fans.
Dust shouldnt matter cuz thats exhaust..
Only put them on the intake fans.
Intel Q6600 (Stock for now)
Scythe Infinity
XFX 680i LT
OCZ 2 x 2GB Platinum DDR2 800
EVGA 8800GTS 640MB
Ultra Aluminus
Mushkin 650watt SLI
Seagate 500gb
Seagate 250gb
DVD Rom/Burner
so whats your impression of the LCD ?
Its a good loking item its perfect if you are thinking to buy, do it you'll be happy with it but it have some thinks that I don't like.
- The angle view its short, to see all the lcd you must be perpendiculary or near.
- The software is a little hard to accustom, but when you have a little bit practise you can do what you want with all the programs that software are compatible.
- If you shut down your computer LCD shous alphacool logo, and the text "SHUTING DOWN" all the time... so LCD don't turn off if power supply its turn on, so you have to turn off the power supply switch to completly shut down the LCD.
All other things is that its BEUTIFUL
Regards!
you should mount one more plate I think,
I mean, this one
duniek made it with his hands :P
~~~~~~~~water ed ~~~~~~~~~~
Sry 4 my english
http://galeriawc.pl
While those covers looks sweet, I'll bet they also hold the heat in pretty good as well (unless you have a small fan aimed right between them and the PCB).
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
ruin our pimp parade why dont u water?? :p, but yeah i can see a lot of heat being trapped in there. you should add a place for a small fan
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
oh my god duniek i'll buy it for sure in a cupple of weeks we'll talk of this new cover plate and some other acrylic godies
The heat of the vga's is not a problem when they're watercooled, the acrylic its not hot at touch, and temps on vga's are ok
but i dnt like spacers betwen the card and the cover its better without screwns or spacers
Sorry for the delays in the updates but some problems have happen and i dnt have time to do nothing!
Regards!
congratz... very nice
--------------------------------------------------
Intel core i7 980x
6GB mushkim
ASUS Rampage 3 Extreme
EVGA GTX 580 SLi
LG L246WP Widescreen
Auzen X-Fi HomeTheater HD
Corsair HX1000w
WD Velociraptor 600GB Raid 0 l WD 1TB Black l Intel X25-M 80GB G2
Silverstone TJ07
---------------------------------------------------
OCGuate!
thanks!
I was out for some time, but now all its going well, acrylics and some other godies from duniek are talked, and i have to make the design.
And when i have seen the 4x120 rad that EKwaterblocks sell:
http://ekwaterblocks.com/shop/produc...roducts_id=247
What do you think? it can be puted for sure down of the Tj07, and they will be rock and 70€ its ok i think i have to think if i purchase or not, what do you think?
Best regards for all!
how'd you get those plates on the GTSs? screws or double-sided tapes?
double sided tapes, they're working properly
Well, there will be a Neptune v2, more hardware, more cooling, more rads, more waterblocks, and i think it will be more beautiful too
In some days i'll begin a new thread to put the new worklog
You can post here what would you have changed of this mod to be simply better
Can't wait SaNxU, Good Luck
- Case : Silverstone TJ07 Black
- Sound : Asus Xonar Essence STX
- Video : Asus GTX 680 4gb w/ Ek Nickel Block
- Board : ASUS Maximus V Formula Z77
- CPU : Core i5-3570K @ 4.5 Ghz
- CPU Cooler : EK-Supreme HF w/Plexi Top
- Memory : 16GB Samsung 2133mhz 10-9-10-29
- PSU: Enermax Revolution 85+ 1050w
- HDD : Crucial 250gb M4 Raid 0
- Radiator : Thermochill PA 120.3
- Reservoir : EK-Multioption Res 250 Rev.2
- Water Pump : Laing DDC-3.2 w/XSPC Top
Ok i'll take a look at it, thanks for the information
And in my v2 will be a lot of 3mm leds in waterblocks!! jejeje
i'm thinking to connect the leds at the fan connectors of the mobo, if i set 100% de fans all the time there wont be any issue, isnt it?
PD: evil, we do at same time v1 of our tj07, and now we are doing v2 at same time too..xD just corious!
I would like to ask a question. I am going to be building a build very similar to this one. I love the way the UV lighting looks on the Tubes.
However, I have a wife that has a skin condition and she gets skin cancer very easily. What I want to know is this....
Are those UV cathodes bad for you? I can see that the cathodes themselves are blocked for the most part by the casing, but is the light thats reflecting off of the components still harmful? I don't want to hurt my skin or the skin of my wife over time because of "bling".
Thanks,
Brian
hi,
just registered to ask this....so I would really like to know!
I know it was a few months back but what are the 120mm and 92mm fans you used...they are really nice looking! and also what tubing is that?
AWESOME job btw.
thanks
Nick
anyone?
Last edited by retrogamer1990; 01-07-2009 at 06:55 AM.
Bookmarks