Quote Originally Posted by -= rtz =- View Post
Delayed shopping for tommorow, Im probably gonna go with G0ldBr1ck's suggestion and dominators since he allready tested it and it works ok,plus for the price of geil ddr800 I can get the dominators + another 250gb hdd for raid.
Might pick up another DS4 or sometn just for testing purposes.

But before I do that,Id like to ask is it possible that incompatibility starts to show with time,cause I remmember in the beginning when i bought all this stuff everything worked fine,even on auto or EPP settings and even with auto express turned on. Starting to think that it could be the mbo/cpu after all...HTT was 1200 MHz with high HTT bus (300) and after Ive set some latencies in AOD for ram all this began to happen. Wouldnt ram incompatibility show immediatly at the beginning,I mean when everything is on stock or it takes some time before it starts to show? (few weeks in my case)

The stop errors Im getting lately all indicate on hardware incompatibility,"PFN_list_corrupt", "IRQL_NOT_LESS_OR_EQUAL" are mostly showing lately and more frequently then ever.No drivers were ever identified in the stop msg's. Memset on EPP/F2 bios sets slots to different Refresh Row Cycle,DIMM 0 is 127ns and others 75ns. If I try to set all to 127ns it only gets worse.
Sorry for not reading all the posts, I'll rather ask you a question. Are you running Phenom/intend to run Phenom?

I have the 2*2gb 1066MHz Dominators. They work exellent with my X2 and 590SLI Chipset, but they did NOT work good with Phenom and AMD 770 chipset in 1066 memclk mode. They barely booted at 7 7 7 28. (using the Abit AX78 board that is not known for good mem performance, so it might be the boards fault)

Ps: The DS4 does not support the Phenom 9950 with it's 140W TDP.