Official GIGABYTE X38-DQ6/X38T-DQ6 Info/BIOS Thread

[steve30x]

You can go through support but its probably quicker to email this guy:

janus.yeh@gigabyte.com.tw

Just tell him your model board and ask for the latency fix

I finally got a reply from Gigabyte support and the guy has no clue what I am saying , asked what exact ram I have and where I got the F4a bios. He didnt give any bios or answer to fix my latency. So Im going to email janus now.

Just incase im doing something wrong with my OC ill post my settings here :

CPU Host control [ENABLED]
CPU Host Frequency [378]
PCI Express Frequency [100]
CIA [Disabled]
Memory Multi [2.66C]

DRam SPD [Manual] (auto was setting the ram to 5-5-5-18)
Cas Latency [5]
Ras to Cas [5]
Ras Precharge [5]
Precharge Delay [15]

Advanced timings [ALL AT AUTO] (Dont have a clue what these are for)

CPU Pci Express Drive Control [800mv]
CPU Clock skew [normal]
MCH clock skew [Normal]

System Voltage control [MANUAL]
DDr2 Over Voltage Control [+0.40v]
PCI Express Over Voltage control [Normal]
FSB Over Voltage Control [+0.20]
MCH Over Voltage Control [+0.250]
GTL Reference Control 1 ratio [Normal]
GTL Reference Control 2 ratio [Normal]
Loadline Calibration [Enabled]
CPU Voltage [1.45 V]

CPU Features

CPU Max to 3 [Disabled]
No Execute Memory Protection [Disabled]
C1e [Disabled]
TM 2 [Disabled]
EIST [Disabled]
Virtualization [Disabled]