Real Temp - New temp program for Intel Core processors

[unclewebb]

SiGfever: When you post a screen shot next time of your frozen temperatures can you also include the tray menu in your screen shot. RealTemp lets you display either the Core Temperature in real time in the System Tray or you can display the Maximum, Minimum or Average temperature in the Tray area. Is it possible that you have the tray menu set to display one of those temps. If the check mark in the menu is beside Core Temperature then it should move equally with the Core Temperature readings displayed in the main RealTemp window.

There are also a few issues with the tray icon and Vista compatibility. I should have a fresh beta ready in a few hours for Vista users to try.

I think 51C is so good and 66º is a bit high...

I agree. That's why you should be using RealTemp and retire CoreTemp. All testing points to TjMax=85C for these processors so I don't know why you would think about using anything else. Start with that, run a 1600 MHz - 1.10 volt test as outlined in the docs and if you need a +1 or +2 correction to get your idle temps up to about 5C over your room temperature then do that. This isn't really rocket science. My load temps around 53C to 54C were confirmed with an IR thermometer at the exact same 1.424 core voltage that you are using running the same test. My Tuniq isn't quite as good as your cooler so your temps are a couple of degrees cooler. This all makes perfect sense so start believing what RealTemp is telling you.