Quote Originally Posted by aGeoM View Post
NB-VID works if I set +xxx% over default.
NB-FID if I set it to >06~what ever APM shows always 2000MHz, then after reboot and enter BIOS NB-FID=06, so the only way to set ie. FID=09(2400) is with Baredit tool after a reboot to windows.

This was tested with 9850BE + Bios 307.
Hmm as usual I mixed up NB-VID and NB-FID in my previous post. I have in mind that i used different nb-fid's with CnQ enabled turing my p-state testings and it worked fine.
Quote Originally Posted by aGeoM View Post
I wrote 0x06 and 0x46 @ 0x1E8 nothing changed @ 0x1EC, as your instructions.
Thank you for testing.
Even if you select that "B0 D24 F3" pci register in the dropdown again?
If i write someting into 0x1E8 it first shows 0x00 as it's new value. After I loaded the pci register again by selecting it in the dropdown the value i wrote in shows up and the data from that register shows up in 0x1EC.
Is bit 3 ox 0x1E4 0b on your system?