**Unified** DFI LanParty UT 790FX-M2R-M2RS / Phenom /Data Base Thread**

[aGeoM]

The odd thing is that different nb vid's and did's worked fine here with the 9600BE and the 4-07 bios. The problem aGeom described did not occure with all phenoms. !

NB-VID works if I set +xxx% over default.
NB-FID if I set it to >06~what ever APM shows always 2000MHz, then after reboot and enter BIOS NB-FID=06, so the only way to set ie. FID=09(2400) is with Baredit tool after a reboot to windows.

This was tested with 9850BE + Bios 307.

Edit

Bios 505:

BIOS CPU-VID=+103.xx%
BIOS CPU-NB-VID=103.xx%



Well...VIDs are working as BIOS 307, CPU-FID can be changed but resets to default (2500), they should ghost this option to.

May I ask that someone with an 9850BE or an other phenom different from an 9600BE posts the values of the registers 0x06 and 0x46 here.

1. Start BarEdit
2. Select "B.0 D.24 F.3"
3. Write 0x06 into register 0x1E8
4. Select "B.0 D.24 F.3"
5. Write down the value of register 0x1EC

Do the same with 0x46 instead of 0x06 at step three.

This data will help to identify the chip and skip some probing routines.

I wrote 0x06 and 0x46 @ 0x1E8 nothing changed @ 0x1EC, as your instructions.