nForce 790i SLI/Ultra chipset mobos - Reviews/OC/Guides

[Guacamole]

Hmm I'm still tweaking my GTL1 and GTL3 refs but it seems core4 is my slouch and is always dying in prime.
Anyone know some good VTT settings for the qx9650? Right now I'm running 1.36 VTT and 1.3625 Vcore.. I'm just trying to tune the GTLs so that I get a solid prime and then I'll bring down the volts.

So far I've tried +3 percent (so 70 percent, but 70-67 percent requires a +3percent*vtt*1000 = x mV increase) and I've tried negative values too.
Anyone else have any experience with the GTLs, have negatives worked well for anyone on quads? Not duals? Does more GTLn ref ruin stability or just feed excess volts and not affect stability? Really trying to fine tune here and seeing how far off I am to get the right values.

Broly I have had the SIIE for about a week and althought I still have nagging issues with data corruption or the appearance of such I can tell you this..

After reading techjunkies post I have had great success with overclocking my QX9650 Stable rock solid at 1780, 1640, 1680, 1800 and a few others

Here are the settings I have used to great succes prime stable for hours
QDR/RAM=1780 Unlinked
PCIE1/PCIE2 = 100
SPP<-> MCP= Auto
vCORE=1.375(1.344 in windows per cpuz)
Loadline =Enabled
vTT = 1.28
PLL=Auto
vDIMM=1.9
vSPP =1.46
vMCP = 1.55
CPU GTL_REF0 = -29mV
CPU GTL_REF1=-32mV
This is at a muli of 9 but I am also rock solid at 9.5 with 1.425 vcore set in bios memory unlinked at 1600 or as close as I can get it.. Try these settings they work.. My other buddy has this board and we are both having great success...

P.S. Ignore my signature I just haven't updated it yet....