Quote Originally Posted by Coupa View Post
Its in intervals (dunno of how much, ive never really been bothered to check).

And i have a Q9450, and ive tried literally every GTLref in the negatives from when it literally wont boot, to the minimum value closest to 0, and still i freeze 10 minutes in to Call of duty 4/Crysis.
Post all your voltages so we can help you and see whats not right. Probably too low or too high vtt?

Quote Originally Posted by saaya View Post
was jk man

im going to update the first post of the 790 corruption thread now
http://www.xtremesystems.org/forums/...d.php?t=183119

BTW, I will do my best to appear on that first page


Quote Originally Posted by hifiking View Post
I got the version 2 board. I have been using cod4 as a stability test, and it freez in max 10 min regardless of gtrlf or vtt. So I continued to other tests. OCCT at least 20 min stable, stopped it myself
3DM06 gfx tests 20 min stable, stopped it myself
memtest86, 20 min stable, stopped it myself

The only way I can freez this board is CoD4, or hours of occt/orthos might do it, but as long as cod4 freez I know there is a problem. I am gonna try some OC now.

My 1600 Kingston memory does 2000 at 8-8-8-20-1T and 2.1v, but performance is best at 1600 7-6-6-12-1T
Ok, where did this version 2 came from?
Try to use 1.20vtt and 1.30vtt to see if that solves anything. Since you have an E8400, dont go higher than 1.38vcore and also make sure when you change your GTLREFS settings, you change them equally. For ex: if its REF0 -20mV and REF1 -10mV, change them to REF0 -30mV and REF1 to -20mV. I think 5010 mentioned this in a post.

Also, make sure you run memtest86 (from DOS) for your RAM, 2.1v is waaay too high for a 24/7. I wouldnt go higher than 1.95v and 2.00v if you have a nice heatspreader or fans on top of them.
You should also try to use 2T because many experience problems running at 1T.
Finally set your SPP to MCP frequency to auto and lock PCI-e frequencies to 100Mhz.

Hope that helps