Quote Originally Posted by Logos4 View Post
off topic:
saw in your sig...
slim if you really want the Armor+ you might just as well buy the non-ESA version now. You might be able later to buy the ESA module - it's just a card/panel to plugin fans + PSU USB connector etc... Not one hundred percent sure this will be sold separately but honestly, ESA is just about NVidia propaganda imho. You can get most of the info (except the PSU though) through other panels and software.

Actually Siverstone even make some ESA panels:
http://www.silverstonetek.com/produc...MD01-ESA&area=

hope that helps
Yes, I was thinking about that because Im really tired of waiting and im getting my stuff next week and with no case, Im nowhere since I wont have anywhere to put my stuff. Thermaltake said they will NOT sell the ESA module separately but I been thinking about it and is just a fan controller with fan readers which Im probably gonna use once or twice.

Quote Originally Posted by tekjunkie View Post
Ok, here are my settings for 445FSB prime stable for 14 hours with no errors on any cores.

QDR/RAM=1780 Unlinked
PCIE1/PCIE2 = 100
SPP<-> MCP= Auto
vCORE=1.375(1.344 in windows per cpuz)
Loadline =Enabled
vTT = 1.28
PLL=Auto
vDIMM=1.9
vSPP =1.46
vMCP = 1.55
CPU GTL_REF0 = -29mV
CPU GTL_REF1=-32mV


I am gonna run 3dmark06 in a loop, to see how 3D stable I am.
Ok so you lowered the REF0 to -29 and the REF1 to -32, since we have yorkies, this settings might also work for me in case I run in trouble. What I want to know, what are the default settings for REF0 and REF1? Because what I plan to do is to lower those settings by -5 until I find the spot. Also, do you manually imput this or does it show you a panel with options? like -30, -29, -28 etc etc

BTW, Congrats tekjunkie nice job now show to us that you are 3D estable and also might want to run some other benchies to be 100% sure