Water Cooled Case Gallery

**NOFX** · 05-03-2008, 07:34 AM

**Soulman84** · 05-03-2008, 08:36 AM

Hi guys, i've been watching this thread for months,now i can reply

here's my system:

built a little waterstation in a crappy old minitower..

here is on my lian li:

now let's look inside the pc:

blocks are D-tek fuzion with 4,5mm nozzle and thermalright backplate,on the gt a Ybris K7

and here's a shot by night

Still work to do..I have to finish the painting of the ws and fix all the mess of cables..

hope you enjoy

**HotGore** · 05-03-2008, 09:39 AM

What is the GPU block?

**Soulman84** · 05-03-2008, 09:53 AM

Originally Posted by HotGore

What is the GPU block?

it's an italian block called Ybris K7

more info here: http://www.ybris-cooling.it/product_...95e6b4ceea1db7

**Mad_Man** · 05-03-2008, 10:13 AM

nice avatar, do you have it in larger?

**begrip** · 05-03-2008, 10:23 AM

hehe soulman it looks like your avatar got some marks on her back ^^ looks ugly

**Waterlogged** · 05-03-2008, 01:21 PM

Originally Posted by lexusxxx

On screenshots of the screen like it is visible...

Q6600@3200мгц 400*8 1.26875v, Asus Maximus Fomula, 2*2048 OCZ Reaper + 2*2048 OCZ Reaper X HPC, Gygabyte-8800Ultra@702/1782/1080 , Armor,
2*raptor 150 + 750 seagate. 3D mark 2006 ~15000 (Vista 64)

1. EK Water Blocks EK-Supreme Acetal
2. promodz south bridge 2.1. promodz north bridge
3. EK 8800GTX/Ultra
4. Laing DC-1
5. Watercool MO-RA 2 + 4 120mm fan 1000 rpm

Looks like kind of a light load for such a big rad, I'd be surprised if it couldn't keep such low temps. Most ppl here could run that on a PA120.3 with only slightly warmer temps (if not equal). It also puts a massive burden on your pump with all the 180° bends, restriction wise, that's probably at least 10 PA120.3's worth. What was the load and how long was it applied?

**nullface** · 05-03-2008, 01:23 PM

Originally Posted by canadiantire

there is no kink . its the light looks like kink

OMG, i just love the "cream yellow" color, do MM make custom painjob's?
I know its just the contrast of the pic, but a case in that color would be awsome!

**mstrmold** · 05-03-2008, 03:21 PM

Long time lurker, first time poster:

It was a fun little project, but I've already received my next list of parts which I hope to post in a few weeks.

**smee** · 05-03-2008, 03:36 PM

First off,

to XS!!

Very nice build m8!! looks great!

And I like that custom window!!!

**[XC] NetburstXE** · 05-03-2008, 03:47 PM

to XS! Great cable management

**Xavior** · 05-03-2008, 04:10 PM

Originally Posted by Aldy402

new motherboard

How did you mount the PSU that way? Using the standard V2000 PSU plate, the PSU is upside down here with the fan drawing air in from the top. Turning it around doesn't work; the power switch hits the circular shape in the plate.

Clean looking setup, btw.

**biftek.** · 05-03-2008, 04:36 PM

Originally Posted by begrip

hehe soulman it looks like your avatar got some marks on her back ^^ looks ugly

I'm pretty sure that's water drops

Nice set up soulman

**Shocker003** · 05-03-2008, 05:17 PM

Originally Posted by mstrmold

Long time lurker, first time poster:

It was a fun little project, but I've already received my next list of parts which I hope to post in a few weeks.

Wellcome to XS and nice rig. I presume that this is not your first watercooled rig, oder

If the first,, you researched well on your parts

**mstrmold** · 05-03-2008, 05:23 PM

Thanks for the kind comments. No, this is not my first WC setup, nor will it be my last. Thanks for the input guys!

**l33t p1mp** · 05-03-2008, 05:46 PM

Mine is kinda junky. Gotta chop off all the extra tubing, put in a t-line, put in better coolant, do a bootleg fan mod so I can cool my ram better, and turn by rad around. I was bored as hell, so I made a vid. Its pretty bad because I didnt edit it yet.

#2 and 3 are about the same thing.

**kinghong1970** · 05-03-2008, 08:16 PM

Originally Posted by biftek.

I'm pretty sure that's water drops

Nice set up soulman

methinks that he's referring to the white stuff that's hindering his view...

**[XC] NetburstXE** · 05-03-2008, 09:50 PM

You must have been really bored to feel a need to make videos of your computer. I think if you replace the coolant with either blue or clear and cut out all the extra tubing it will look quite nice. I'm not really a fan of it now because the green coolant and all the extra tubing.

**Soulman84** · 05-04-2008, 01:03 AM

thanks all guys...but i thik you like more my avatar than my system

**lexusxxx** · 05-04-2008, 02:03 AM

Originally Posted by Waterlogged

Looks like kind of a light load for such a big rad, I'd be surprised if it couldn't keep such low temps. Most ppl here could run that on a PA120.3 with only slightly warmer temps (if not equal). It also puts a massive burden on your pump with all the 180° bends, restriction wise, that's probably at least 10 PA120.3's worth. What was the load and how long was it applied?

<massive burden on your pump> you test this rad? Water stream above than i`am use alphacool GTs 240

<What was the load and how long was it applied> game (assassin`s creed) 2-3 hour, OCCT 1 hour

sory for my English...

In general sense of a radiator in that that it big and on it it is possible to hang up many fans and it all the same will be silent and effective.
To me to like.
PA120.3 (PA120.4) very good radiator but it not so will be harmoniously looked on a lateral wall.

Also do not forget all my fans very much very silent and blow poorly

Thanks for your opinion.

**elpibe10** · 05-04-2008, 03:52 AM

Originally Posted by Soulman84

thanks all guys...but i thik you like more my avatar than my system

True

**Shocker003** · 05-04-2008, 07:23 AM

Originally Posted by Shocker003

change my barbs to 8mm for better flow and repainted my case.
New pix included...

I guess no one likes my rebuilt rig

I can´t improve on my next build if you guys don´t comment on my errors. So please point out the faults in this built. and my temp ís still high

**Aldy402** · 05-04-2008, 07:39 AM

@Xaviar, it's the same plate but I just drilled the necessary holes..
and thanks

**taylormsj** · 05-04-2008, 07:47 AM

Originally Posted by Shocker003

I guess no one likes my rebuilt rig

I can´t improve on my next build if you guys don´t comment on my errors. So please point out the faults in this built. and my temp ís still high

The only thing i dont like are the fan grills, the rest looks good, im not sure about your temperatures, what are you room temps, what fans are you using, and i dont know much about your pump, is it powerfull enough?

**Waterlogged** · 05-04-2008, 08:51 AM

Originally Posted by lexusxxx

<massive burden on your pump> you test this rad? Water stream above than i`am use alphacool GTs 240

<What was the load and how long was it applied> game (assassin`s creed) 2-3 hour, OCCT 1 hour

sory for my English...

In general sense of a radiator in that that it big and on it it is possible to hang up many fans and it all the same will be silent and effective.
To me to like.
PA120.3 (PA120.4) very good radiator but it not so will be harmoniously looked on a lateral wall.

Also do not forget all my fans very much very silent and blow poorly

Thanks for your opinion.

Don't take my word for it.

http://www.xtremesystems.org/forums/...highlight=mora

http://www.xtremesystems.org/forums/...highlight=mora

Just do a search for "MO-RA", "MORA", or "mora" to find many many more topics discussing just how pathetic the rad really is.

Originally Posted by Shocker003

I guess no one likes my rebuilt rig

I can´t improve on my next build if you guys don´t comment on my errors. So please point out the faults in this built. and my temp ís still high

Shocker, I like but...I think you need to remove those restrictive Alphacool blocks. I think that's your biggest problem now, that and maybe 12/10 tubing next time, 8mm I.D. is still a bit small.

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

Bookmarks

Bookmarks

Posting Permissions