Water Cooled Case Gallery

**skinnee** · 05-01-2008, 01:52 PM

Originally Posted by taylormsj

Some from my worklog (still in progress)

http://www.xtremesystems.org/forums/...62#post2953662

Genius of an idea with the rubberband holding the fan over the RAM slots.
That is a rubberband isn't it?

**taylormsj** · 05-01-2008, 02:20 PM

Originally Posted by skinnee

Genius of an idea with the rubberband holding the fan over the RAM slots.
That is a rubberband isn't it?

No

Its 2 rubber bands twisted round each other

**skinnee** · 05-01-2008, 02:48 PM

Well...double genius points for using two!

**[XC] NetburstXE** · 05-01-2008, 02:54 PM

Originally Posted by taylormsj

No

Its 2 rubber bands twisted round each other

Do I see someone being difficult?

**lichyetan** · 05-02-2008, 12:10 AM

my build... latest update with DFI Lanparty UT-P35 T2R..

**smee** · 05-02-2008, 12:17 AM

lichyetan, that looks SICK!!!!!!

More pics, MORE PICS!!!!!!!!!!!!!!!!!!!!!!

**Voo Doo** · 05-02-2008, 12:36 AM

Originally Posted by smee

lichyetan, that looks SICK!!!!!!

More pics, MORE PICS!!!!!!!!!!!!!!!!!!!!!!

I concur. MOOOOOOOOOORE!!!

Anyway it looks good.

**Aldy402** · 05-02-2008, 05:22 AM

new motherboard

**fungry** · 05-02-2008, 05:36 AM

Haha nice. x48 ^^

**lexusxxx** · 05-02-2008, 10:56 AM

Originally Posted by Waterlogged

I'm sorry you think that. Please read section #3 here to know why that's not a good rad at all.

Air 27C water 34C in load and 30C in idel. 4*120mm fan 1000rpm, Low noise.
Any questions? At you what difference of temperatures?

**kibubi** · 05-02-2008, 11:51 AM

my rig in video clip:
YouTube - IOPANEL - KIBUB'S RIG- WATER COOLING

the track is infected mashrum

**CraptacularOne** · 05-02-2008, 12:22 PM

Hey guys, just thought I'd show you fellows my new rig I've built (specs in sig)

Don't mind the phase change unit under it

**the monk** · 05-02-2008, 03:49 PM

hello fellas, im a noob watercooler......actually this is my first real build using different components. i have duel black ice extremes, a danger den cpu block, and a ek northbridge block for my set-up. the video is just aircooled. still have to install top and side covers......ther at my friends gettin some lazer engraving. will post update when its all completed. i have the q6600 quad running @ 3.6ghz. peace, randy.

**DrMambo** · 05-02-2008, 06:13 PM

After many months of reading on XS, here's my baby.

Desk:

With side on:

Side off

GFX

Northbridge cooling, mounting idea stolen from Deanzo :P

Rads in the bottom. Its a really tight fit, a 360mm on one side and a 240mm on the other side, but I made it fit.

Needs a bit of cable tidying, but I just wanted to get in and play games, so it'll have to wait :P

**Waterlogged** · 05-02-2008, 08:25 PM

Originally Posted by lexusxxx

Air 27C water 34C in load and 30C in idel. 4*120mm fan 1000rpm, Low noise.
Any questions? At you what difference of temperatures?

What are your full specs? Any OC?

**natech** · 05-03-2008, 04:33 AM

So many nice rigs here

This is my first WC rig and I seriously made lots of mistakes. I'm going to repaint the case, redo the whole WC setup, add 8800GT to loop and mount rad inside the case. Maybe even get rid of res and add T fitting. I would be very glad if someone would point out what is wrong in my WC setup so I don't made same mistakes again. I mean really point out everything what is wrong, don't hesitate, make me cry, its all good. Ofcourse you cannot see pump which is hidden in 5.25" slots. Don't have any pics of that, but I think no-one even wants to see it

Going to take more pics when I have done everything right

So, those pics:

And sorry for my bad english hope someone understood what I meant.

**disruptfam** · 05-03-2008, 04:37 AM

very clean = very nice

**ed_hunter** · 05-03-2008, 04:47 AM

thats mine also...before it is broken again...this is the first of the two broken P5e......

**SoulsCollective** · 05-03-2008, 05:12 AM

Blergh Thermaltake waterblock

**fungry** · 05-03-2008, 05:20 AM

Hahaha TT waterblock. Btw, your revised build looks great. Nice and tidy ^^

**Gir92** · 05-03-2008, 05:52 AM

I lost an MSI P35 board and an 8800 GT to a leaking thermaltake rad..... That was when the GTs first came out and were about 310. But now I'm on quality watercooling and have nad no more incidents

**NOFX** · 05-03-2008, 06:10 AM

Hi Guys!
My 2-loops wc Lian-Li V2100 :

But i need 3x 100cm sata uv cables

**lexusxxx** · 05-03-2008, 06:33 AM

Originally Posted by Waterlogged

What are your full specs? Any OC?

On screenshots of the screen like it is visible...

Q6600@3200мгц 400*8 1.26875v, Asus Maximus Fomula, 2*2048 OCZ Reaper + 2*2048 OCZ Reaper X HPC, Gygabyte-8800Ultra@702/1782/1080 , Armor,
2*raptor 150 + 750 seagate. 3D mark 2006 ~15000 (Vista 64)

1. EK Water Blocks EK-Supreme Acetal
2. promodz south bridge 2.1. promodz north bridge
3. EK 8800GTX/Ultra
4. Laing DC-1
5. Watercool MO-RA 2 + 4 120mm fan 1000 rpm

**CraptacularOne** · 05-03-2008, 06:39 AM

Originally Posted by natech

So many nice rigs here

This is my first WC rig and I seriously made lots of mistakes. I'm going to repaint the case, redo the whole WC setup, add 8800GT to loop and mount rad inside the case. Maybe even get rid of res and add T fitting. I would be very glad if someone would point out what is wrong in my WC setup so I don't made same mistakes again. I mean really point out everything what is wrong, don't hesitate, make me cry, its all good. Ofcourse you cannot see pump which is hidden in 5.25" slots. Don't have any pics of that, but I think no-one even wants to see it

Going to take more pics when I have done everything right

So, those pics:

In the pic above. When you redo the loop make sure you change the intake of the CPU block to the bottom. You want the water flowing in from the bottom to the top to eliminate any possibility of their being bubbles at the top of the CPU block.

Other than that, nice looking rig and good cable management