Phenom 9500 w/ MSI K9A2 Platinum

[Suosaaski]

Suosaask you can just do it with BAR_EDIT, no need to swap BIOSes.
If it was the NB, then you would have the problem at stock too though.

OC - if its stable, use it daily without worry. Then you'll see whether it really is stable

I would like my OC to be enabled all the time, not by some program.

What I meant by NB, is that it ran at 2034MHz where as stock is 1800MHz, so I don't quite understand why I would have the problem also at stock...

Well, I already figured out my OC wasn't stable at 2,6GHz, but at least one person at a Finnish forum also had problem with NB climbing too high with his 9750, he has lowered the multi so that NB and HT results at about 1750MHz and as far as I understand, 3GHz seems stable for him so far. His motherboard is MSI K9A2 Platinum, and he also reverted back to BIOS 1.1 to get P-States and NB multi working again.

By the way, does anyone happen to know the default volts for NB and HT? Would be nice to know.

PS. Of course, I could try to raise the volts for my memory too. Had it at 2.0V.