Phenom 9500 w/ MSI K9A2 Platinum

[justapost]

Had to finish the winxp install first. (Hmm grub2 does not set the start partition for windows correct must be hd(0,1) not hd(0,0).)
I use CAT 8.4 drivers, all other drivers came from driver packs on my install cd (few month old).

780G comes with HD3200 but here is the 3DMark06 result.

GBT780G - 4850e 2.5GHz - HD3200

1213/396/462/1901

CPU Temp reading is not correct here and if i set cpu voltage to auto the bios uses 1.25V. I have not yet updated the bios.

Here are screenshots with my settings (idle/load).


CPU-Z(idle): 1.264-1.280V
CPU-Z(load): 1.312V

Would be nice if you can test power consumption with the Seasonic once for better comparison.

I use 4x1GB G.Skill FS-6400CL4GBHK (4-4-3-5), one WD500ABYS RE2 hd and no cdrom (have only one here which is attached to my Sapphire setup atm).
Case has one ~10cm fan.

EDIT: I wrote an email to GBT support about these voltage and temperature issues.