**Official DFI LanParty UT X48-T2R(and LT) Discussion

[cstkl1]

My X38 had it, and so did the P35 that I had.

I'm going to have a poke around later and see if it is just the software that is reporting wrong, I will report back with my findings later on tonight hopefully

I will ask DFI for you as well.

thanks
another weird issue just cropped up
1:1 500fsb CL4 TRD 7..

it suddenly didnt work and was causing so many failures
heck even cant boot

tried 3 different sticks..
Team Xtreem PC2-6400 CL3's
Team Xtreem PC2-8500 CL5's
OCZ Flex PC2-8500 CL5's

even at 2.4vdimm also no effect

all of this had no probs with the maximus running at 1000mhz CL4 at 4.5ghz!!

it start with some boot manager issue on boot from restart
then it had trouble entering windows
then i reran windows mem diagnostic tool.
it failed in 9%
all of the sticks. from 1 stick to 4 stick config since i have 2 pairs of each with the same batch serials
so had to back it down to 1000mhz 5-5-5-8 TRD 8 rest same as the template 1.5vNB, set 2.00v dimm.
passed 10 passes for Team Xtreem PC2-6400 CL3
2.03vdimm for ther other 2 at 5 passes..

trying to figure out what happened.. it all started after sleep mode last night i booted up.. restarted and just loaded one of the profile i had for 500fsb saved..

till now cant get CL4 to work ..