Xeon E3110 oc - Quick test

[Mykou]

So your old Q746A534 is better than your newest Q807A091?

didn't push Q807A091 , just tried 4 gh stable with 1.20v

ATM my Q746A534 is very satisfying , 4ghz stable orthos with 1.29v load ,with abilities to do 540 fsb max , booting under vista at 4.78 Ghz air cooling .

THe best is to come with next steppings , might also try a E8500

mykou sell me Q807 :P

you should have told me that earlier lol but Q807 should not be so difficult to get now .

[M3kk]

Please guys, test a max FSB for a Q807A x x x .

Thanks .

[Mykou]

Please guys, test a max FSB for a Q807A x x x .

Thanks .

didn't try for my former Q807 but my Q746A534 does 540 max fsb air cooling on both asus P5KC and P5K premium black pearl .

expect more with other cooling than air I bet or with P965 mobos.

[flashnc]

e3110 at tankguys 214.00 retail 187.00 oem

[RealTelstar]

looking for one ?

Yeah, i posted also an ad in the market section. But I have ordered one. Hoping they dont send me a different batch. 4ghz @1.2 is all I want and the 807 seem the right batch/stepping for this.

I'll know in a week or so.

[Mykou]

Yeah, i posted also an ad in the market section. But I have ordered one. Hoping they dont send me a different batch. 4ghz @1.2 is all I want and the 807 seem the right batch/stepping for this.

I'll know in a week or so.

Yes this batch rocks

[rkingj]

Hi Guys, how about Xeon E3110(OEM) Q805A165 that is sold by Tankguys? Is this batch good for Over-clocker? Thanks a lot!!!

[Mykou]

Yeah, i posted also an ad in the market section. But I have ordered one. Hoping they dont send me a different batch. 4ghz @1.2 is all I want and the 807 seem the right batch/stepping for this.

I'll know in a week or so.

let us know

[CCC]

Hi Guys, how about Xeon E3110(OEM) Q805A165 that is sold by Tankguys? Is this batch good for Over-clocker? Thanks a lot!!!

i got my OEM Q805 from tankguys a few weeks ago and its not bad.. i havent maxed mine out yet but 450x9 4050mhz is prime stable @1.33v.. not the best ive seen but will do just fine

[MADMAX22]

Same here. The 805 seem to do good up to about 4ghz then after that really need some vcore. Atleast in my case.

[Brama]

I am waiting a new 3110 from a batch distributed in Europe...I am crossing my fingers and touching my jewels

[TEDY]

Q745A778 crappy right?

[Mykou]

Q745A778 crappy right?

depends on what you're looking for

Q807 ,Q748 and Q743 seems very good for E8400s

did'nt try xeon yet ?

[syl]

Another vote for Q807 or Q807A091 to be exact:

Vcore (idle) = 1.36
Vcore (load) = 1.352
Room Temp = 20c
Load Temp = 70c

[GamingDaemon]

I just received the Q805A165 batch of the E3110 from TankGuys.

I am building the following rig:

• Antec 900
• DFI Lanparty DK P35-T2RS
• Intel XEON E3110
• Crucial Ballistix Trace 2x1GB DDR2-1066
• Zalman 9700
• PC Power & Cooling 610W PSU
• eVGA 8800GTX (poaching from my other rig)
• Creative SB X-FI Sound card (poaching from my other rig)
• 2x320GB WD AAKS (RAID 0)
• 640GB WD (backup drive)
• 2x ASUS DVD Lightscribe Burner

I plan to OC to 4GHz. I'll let you know if that's possible...

[rkingj]

It should be no problem

I just received the Q805A165 batch of the E3110 from TankGuys.

I am building the following rig:

• Antec 900
• DFI Lanparty DK P35-T2RS
• Intel XEON E3110
• Crucial Ballistix Trace 2x1GB DDR2-1066
• Zalman 9700
• PC Power & Cooling 610W PSU
• eVGA 8800GTX (poaching from my other rig)
• Creative SB X-FI Sound card (poaching from my other rig)
• 2x320GB WD AAKS (RAID 0)
• 640GB WD (backup drive)
• 2x ASUS DVD Lightscribe Burner

I plan to OC to 4GHz. I'll let you know if that's possible...

[GamingDaemon]

It should be no problem

Awesome. Since the E3110 proc has a voltage range of 0.956-1.225V, and it looks like I need to go to 1.36v (in BIOS) to get to 4GHz, will that hurt or damage the proc?

[CCC]

Awesome. Since the E3110 proc has a voltage range of 0.956-1.225V, and it looks like I need to go to 1.36v (in BIOS) to get to 4GHz, will that hurt or damage the proc?

no way to know for sure but as long as its running at an acceptable temp then you should be fine

[Jupiler]

Got me a Q805A165 yesterday.
Not a great chip, but still managed to reach 4ghz, 1.328V with it.
Temps under load are high though, despite WC.

[Jikiri]

Dunno if this helps anyone but I just got a E8500 from newegg 4/25/08 batch # is Q807A213 pack date 4/15/08 anyone have any info on these yet im a noob
Still waitin for my case n mem

Under Construction:
Not Delivered yet:
Case: SilverStone Temjin TJ10
Ram: OCZ Platinum 4GB(2 x 2GB) 1600mhz
On Hand
CPU: Intel e8500 retail Q807A213
MOB: NVIDIA nForce 790i Ultra
GPU: B.F.G. OSXE 9800gtx 512mb (prob x2 later)
PSU: Silverstone da 750
OS: 64bit vista ultimate
HDD: 2x500gb Seagate Barracuda's 7200.11

[zfactor]

anyone get a e3110 from newegg in the last week or so im wondering what they are shipping right now.. thanks

[GamingDaemon]

Well, I'm pretty discouraged. I chose the E3110 Q805A165 and the DFI DK P35 board because so many people were touting how easy it was to get to 4GHz. I have done the following:

• 8 x 500FSB
• 1:1 Memory
• VCore over 1.4v (1.37v actual)
• DRAM 2.11v
• NB 1.55v
• VTT 1.1v
• GTL .67/.67/.67

At this point, I have added 250mV to VCore. After that, the additional voltages are in red and I am afraid to go there. Here I paid $140 for a DFI Lanparty DK board, and people are getting to 4GHz on $100 Gigabyte boards. What's worse, I have the Gigabyte DS3L board untouched, unopened in my office. I am staring at it now. I was talked out of a Gigabyte DS3R because the DFI is so much better.

Right now, I am just discouraged and disappointed.

[Tarowah]

Well, I'm pretty discouraged. I chose the E3110 Q805A165 and the DFI DK P35 board because so many people were touting how easy it was to get to 4GHz. I have done the following:

• 8 x 500FSB
• 1:1 Memory
• VCore over 1.4v (1.37v actual)
• DRAM 2.11v
• NB 1.55v
• VTT 1.1v
• GTL .67/.67/.67

At this point, I have added 250mV to VCore. After that, the additional voltages are in red and I am afraid to go there. Here I paid $140 for a DFI Lanparty DK board, and people are getting to 4GHz on $100 Gigabyte boards. What's worse, I have the Gigabyte DS3L board untouched, unopened in my office. I am staring at it now. I was talked out of a Gigabyte DS3R because the DFI is so much better.

Right now, I am just discouraged and disappointed.

A couple of things to try, raise your VTT to 1.3v, I wouldnt go over 1.4v on the VTT, I have seen some people say more than 1.4v on the VTT is killing 45nm chips, and adjust your GTL accordlingly, I leave my GTL on auto up to 450-475 FSB and I dont start running into issues untill 480 FSB with my DFI X38.

Change the strap and slow that FSB down a bit, I would try to get the CPU stable at 4Ghz with a lower FSB first and then shoot for max FSB, I am by no means an expert here and you may in fact know more about o/cing than I do but I konw these DFI boards have so many settings that they can be a PITA to get stable.


Good Luck.

[RealTelstar]

My #Q807 just arrived safe and sound

[Mykou]

My #Q807 just arrived safe and sound

cool ! let's see some benches then