** OFFICIAL ** Intel DX38BT & DX48BT2 BoneTrail Thread

[Sean-E-Boy]

Ok, in the attached Word doc is what I did with my system (and I had already been OCing the CPU without really messing with the memory).

The initial trick here is to know what voltage settings will result in a stable system at your desired CPU overclock, in your case, 333x9 while having the memory ref and freq at something well below what you are trying to reach, say 333/800 instead of 333/1333. That way, you can rule out “is my vCore or my vFSB too low” and just increase the vMCH or tweak memory voltages and or timings. Hell, if you have to, drop it all the way down to 400/800

Sean

and Anubi, i have been looking at multi in CPU-z, never see that range thing come up on my computer. I always assumed that when you saw that on a screen shot it meant that they had an ES or Extreme series chip. mine is just plain ol retail.