Official Gigabyte X48T-DQ6 Info Thread

[kronos]

The settings that I've posted above are safe settings just to see if you can get the board to run your 4 DIMMs at DDR3-1600.
The CPU will be running at 2.8GHz with these settings, which will be totally stable ( it's lower than the default ).

Make sure you're using BIOS F4h or F5a
Both can be downloaded from http://www.benchzone.com/Downloads/B...e/GA-X48T-DQ6/

Just as a correction, BenchZowner. I have two sticks instead of four. Right now I have the original Bios that came with the board, that being the F4. Don't know if the two sticks make any different. I would prefer to have the processor at the default setting of 3.0, is this possible? Sorry to be such a bother.