Quote Originally Posted by kronos View Post
I'm still having problems getting the memory frequency adjusted. The highest frequency I can get is 1333 with 4.00B. I have that Gigabyte utility EasyTune5Pro installed on my computer, should I try that? Any other suggestions, Ace.
Do yourself a favor and try the following settings:

GIGABYTE GA X48T DQ6 Clock Settings

MB Intelligent Tweaker (MIT)
Robust Graphics Booster...........: Auto
CPU Clock Ratio...................: 7x
CPU Frequency.....................: +0.0
CPU Host Clock Control............: Enabled
CPU Host Frequency(Mhz)...........: 400
PCI Express Frequency (Mhz).......: 120
C.I.A.2...........................: Disabled
Performance Enhance...............: Standard
System Memory Multiplier (SPD)....: 4.00D
Memory Frequency(Mhz).............: 1,600
DRAM Timing Selectable ...........: Manual
Standard Timing Control
CAS Latency Time (tCL)............: 8
DRAM RAS# to CAS# (tRCD).........: 7
DRAM RAS# Precharge (tRP).........: 6
Precharge Delay (tRAS)............: 21
Advanced Timing Control
ACT to ACT Delay(tRRD)............: 7
Rank Write to READ Delay (tWTR)...: 7
Write To Precharge Delay (tWR)....: 9
Refresh to ACT Delay (tRFC).......: 72
Read To Precharge Delay (tRTP)....: 7
Static tREAD Value (tRD)..........: 10
Static tREAD Phase Adj............: Auto
Command Rate (CMD)................: 2T
Clock Driving and Skew Control
CPU/PCIEX Clock Driving Control...: 800mV
CPU Clock Skew Control............: Normal
(G)MCH Clock Skew Control.........: Normal
System Voltage Control () = Base Voltages
DDR3 OverVoltage Control...(1.50v): +0.35v
PCI-E OverVoltage Control.,(1.50v): Normal
FSB OverVoltage Control....(1.10v): +0.30v
(G)MCH OverVoltage Control,(1.45v): +0.350v
CPU GTLREF1 Voltage*.......(67%)..: Auto
CPU GTLREF2 Voltage*.......(61%)..: Auto
Loadline Calibration..............: Enabled
CPU Voltage Control...............: 1.375v
Note: * Hidden Features Press [CTRL] + [F1] from main Menu to Access
Advanced Bios Features
Limit CPUID Max to 3..............: Disabled
No-Execute Memory Protect.........: Disabled
CPU Enhanced Halt(CIE)............: Disabled
CPU Thermal Monitor 2.............: Disabled
CPU EIST Function.................: Disabled
Virtualization Technology........: Disabled