Quote Originally Posted by Zinthar View Post
FSB/multi: Trying both 390x9 and 440x8
RAM Divider: 1:1 (so 780 Mhz or 880 Mhz depending on the configuration, both seem to be equally stable/unstable)
vCore: 1.4575v
MCH: 1.48v
CPU VTT: 1.31v
ICH10: 1.7v
ICH: 1.09v
DDR2: 2.20v
DDR2 REF: +2%
CPU GTLREF: 70% on both
RAM Timings: 5-5-5-18
C1E & EIST disabled

This is my first attempt at running 4 DIMM's in a motherboard. This is frustrating to the point where I'm considering just dropping the Ballistix and going for a 2x2GB set of Corsair or G.SKILL's, but I'd really prefer to get these Crucial's working and call it a day.

P.S. As I type this I'm actually stable for 50 mins now on the blend test at 440x8. My only new change was setting DDR2 REF to +2%. Could that have been the key? Anything else I might try from those of you with experience pushing 4 DIMM's on this board?
the +2% is a must for reliablity.

the other thing you can do is try higher MCH voltage.