Real Temp - New temp program for Intel Core processors

[NaeKuh]

Did you try calibrating idle temps as per the 1st post?

yes, it showed all my diode movement. But my cores still idle at 16C when the air intake on my radiator is reading 20C. The coolant levels in my system on idle stay a constant 21-22C.

Trust me, my system is spec'd out to be fully monitored. I cant get real temp to display temps above ambient at idle unless i do the obvious, put load.

If you need something let me know i'll be more then helpful. We do need a good monitoring program.

That's sort of what I thought. Room temp is what you compare to when you are air cooled but if you are water cooled then you would need to idle for a while until your core temp and water temp are stable. You would then compare RealTemp to your water temp.

No, im serious there is something wrong with the middle cores in your program. Its not how long the system is up. Mine has been up for Weeks and it still says 16C.

Here is how i monitor my loop. I have the new scythe fan controler which has 4 temp display.

Probe 1: Cpu loop res Temp probe <gets coolant temps>
Probe 2: is taped to the front of my radiator intake to get accurate ambients
Probe 3: GPU Loop reservoir
Probe 4. Gpu Radiator intake.

Probe 5 which is on my matrix orbital using dalas double confirms the water reading with my scythe.
Probe 6 which i have on my gpu loop, another dalas probe also confirms my water temps.

the H2o system on my unit is probably ranked in the top 1&#37; too if you want to know.

So no, my messurements are pretty much on the dot, and im telling you, i cant get my middle cores to NOT be lower then ambients on idle unless i put load on it.

Dayam i wish you had a yorkfield, you'd probably understand what i mean.