Real Temp - New temp program for Intel Core processors

[unclewebb]

I'm on water.

That's sort of what I thought. Room temp is what you compare to when you are air cooled but if you are water cooled then you would need to idle for a while until your core temp and water temp are stable. You would then compare RealTemp to your water temp.

Ramaistro: You need to be a lot more specific about your set up, method of cooling, room temperature, MHz, core voltage, etc., etc.

If the TjMax I picked for your B3 is wrong, then your temperatures would be reported too low. The best test for this is to lower your MHz and core voltage as outlined in post#1 and compare your core temperature to your room or water temperature. In your screen shot your Minimum reported temps look reasonable. If you can make them go 10C lower than your room temp during testing then I probably screwed up and you should be using a higher TjMax. The B3 Quad uses two B2 dual cores which are both TjMax=85C so that's one of the reasons why I went with that number.