Quote Originally Posted by ninjaskija View Post
Hi guys.. I'm never posted here and i think i read most of the thread, but i want to ask u if u had some experiences with 4GB OCZ DDR2 PC2-8000 Platinum XTC witch I think they have Powerchips. Now i'm trying to test them at 500 FSB running memory at 1:1.

CPU Feature Page
Thermal Management Control................Enabled
PPM (EIST) Mode...........................Enabled
Limit CPUID MaxVal........................Disabled
CIE Function..............................Auto
Execute Disable Bit.......................Enabled
Virtualization Technology.................Enabled
Core Multi-Processing.....................Enabled

Main BIOS Page
Exist Setup Shutdown......................Mode 2
Shutdown After AC Loss....................Disabled
O. C. Fail Retry Counter..................0
CLOCK VC0 Divider.........................Auto
CPU Clock Ratio...........................6x
CPU Clock.................................500 MHz
Boot Up Clock.............................Auto
DRAM Speed................................333/667
PCIE Clock................................100MHz
PCIE Slot Config..........................1X 1X

CPU Spread Spectrum.......................Disabled
PCIE Spread Spectrum......................Disabled
SATA Spread Spectrum......................Disabled

Voltage Setting Page
CPU VID Control...........................Auto
CPU VID Special Add.......................Auto
DRAM Voltage Control......................2.190V
SB 1.05V Voltage..........................1.070V
SB Core/CPU PLL Voltage...................1.55V
NB Core Voltage...........................1.51V
CPU VTT Voltage...........................1.10V
VCore Droop Control.......................Disabled
Clockgen Voltage Control..................3.45V
GTL+ Buffers Strength.....................Strong
Host Slew Rate............................Weak
GTL REF Voltage Control...................Disabled
CPU GTL1/3 REF Volt.......................N/A
CPU GTL 0/2 REF Volt......................N/A
North Bridge GTL REF Volt ................N/A

The problem is that i experience some stability issues testing with prime95 blend after 2h or so.
Do u think i need more juice to NB? or is a tRFc setting ? donno..
Hey Ninjaskija,

Your RAM is 2x2gb sticks? I've had no luck with stability even at stock with my gskill 2x2gb 1066 sticks...I've had the same issues observed by Lestat in this post with my dfi X48 board and e8400 cpu:

http://www.xtremesystems.org/forums/...d.php?t=177258

If you do get them running stable at a 500fsb, would you post your bios settings? I know it's a different board and different brand of ram, but I think the gskill sticks use powerchips too. Thanks!

I think Praz mentioned some testing with 2x2gb sticks a page or two ago on this thread and I'm eagerly awaiting his findings...