Real Temp - New temp program for Intel Core processors

[Nevrsadie]

Thanks for the reply Uncle. The data I sent you was idle temps overclocked, so I got home today and did actual idle temps per your original post.

Heres my idle temps 266*6 @ 1.02v room temp 22C

29 26 22 29


cores 0 and 3 are 7c over room temp, core 1 is right in line and core 2 is low.

I adjusted my idletemps in the realtemp.ini as follows

-1 0 1 -1

This put all four cores within 3-5c of my room temp of 22c.


I then rebooted and overclocked my Q6600 to 9*378(3400Mhz) at a vCore of 1.381. Then started Prime95, small fft's, to achieve full load.



All four cores reading the same temp, Sweet!
I did not have to adjust the tjmax.