Quad Core OC Database

[miahallen]

Craptacular, here are all the new posts since your last DB update.

1) Q6600 G0
2) L723A930
3) http://valid.x86-secret.com/show_oc.php?id=275199
4)
5) Dtek Fuzion, PA120.3, YL Mediums, DDC3.2 with Petra's top and MCW-60 on a 8800GTS in on loop
6) 1.45 Bios - 1.432 measured - 1.416 load
7) Asus P5K-E AP/Wifi

Q6600 G0
L34B164
vcore 1.472
Thermalright Ultra 120 Extreme
Gigabyte GA-P35-DS4

New high for me...3.85GHz 8hrs prime95 stable on air!

1) Q6600 G0
2) L727B159 - pack date 09/08/2007
3) CPU-Z #278333
4)
5) Thermalright Ultra 120 Extreme
6) 1.575V (BIOS) - 1.536V (with vdroop)
7) Gigabyte GA-P35-DS4 Rev.2.0 f9b

Q6700 @ 3.5 GHz (10x350)

1) Q6700 G0
2) L726A915
3) http://valid.x86-secret.com/show_oc.php?id=275637
4) Click for screenie!


5) Thermalright Ultra 120 eXtreme w/ Noctua NF-S12 ~1400 RPM
6) 1.41V under load (actually 1.5V bios; 1.46V idle; 1.41V load)
7) Asus P5B Deluxe WiFi-AP bios 1223

I can actually run things quite nicely @ 3.6 GHz, but i don't feel the extra vcore needed is worth it.

3.6ghz 9+ hours prime.

1) Q6600 G0
2) L737B063
3) CPU-Z #278324
4) below in attachment
5) Thermalright Ultra 120 Extreme
6) 1.304v Load
7) Asus P5k Deluxe

Don't know if you'll count this one cuz its a short prime but I already sold the cpu so I can't re-prime it but i assure you it was stable.


Xeon 3220 ES @ 3.6ghz 5min prime

3.6ghz 9+ hours prime.

1) Xeon 3220 G0 ES
2) dun rmb whole batch code but it was L717A
3) CPU-Z #277804
4) below in attachment
5) Thermalright Ultra 120 Extreme
6) 1.33v Load
7) Asus P5k Deluxe

1. QX 9650
2. L739A640
3. 1.34v Vcore
4. Watercooled
5. Asus Maximus Formula SE

Q6600-GO
L727A918
http://valid.x86-secret.com/show_oc.php?id=280286
Cooling in sig
1.65
evga 680i





Only 2.5 hours prime..but I'm going to try for 4GHz+, if I can't make it I'll post up an 8 hour prime run.

Q6600 G0 L737B064
D-tek Fuzion - MCR320 - MCP655
3800Mhz (475x8) 1.392v
Asus P5K Deluxe



PS: New CPU, new BD entry plz

Rbs.

First day results so far:

• Q6600 g0 L737B242 VID 1.2125
• Asus X38 Maximus Formula
• Thermalright Ultra-120 Extreme
• 3.6ghz @ 1.288 idle/load

Testing & results will be continued...

~ Update ~ Day 2 testing.

• Q6600 g0 L737B242 VID 1.2125
• Asus X38 Maximus Formula
• Thermalright Ultra-120 Extreme [ Cpu & heatsink unlapped]
• 3.825ghz @ 1.376vcore idle/load

12 hours Prime small ffts stable. 3.825ghz @ 1.376vcore. Tried 1.368vcore but rebooted between 10-11 hours.

This cpu seems lots better then my previous 1, up to 4.0ghz

updating my old OC... Vcore at 1.3425V @ 3.5Ghz...

Q6600 GO - L726A854 - 3.6GHz P stable - WC D-Tek Fuzion - 1.392v - ASUS P5K Dlx

Hi,
After my B3, a L734 G0 doing 3.6GHz at 1.42v, I got a new G0 L740B126



It is with open window for some minutes. At 24°C ambiant, it is as hot on 2 cores as with my previous L734A at same 3.6GHz but with 1.424 real vcore instead of 1.334v forr this one

So, despite the lower vcore, it heats quiet the same as a per clock reference. The delta between cores is up to 7°C usually. I'll try to reseat in few days with some MX-2, then I'll try a vertical mount of my WB. If nothing do it, I could lap it

See my signature for all hardware setup

The most interesting, is my P5B deluxe stable at that memory OC, timings and just 1.25v on the NB. And hey, it is 266 strap. The X38 is a best clocker, but couldn't clock this at 266 strap on a qaudcore and furthermore with 1.25v.

I got a really good P965, even if it is a C1 revision

Q6600 G0
L737B264
Watercooled (TT Bigwater 745 with Apogee GT WB, 2xSwiftech MCW30 on NB/SB)
1.3875 set in bios; 1.376 in windows idle/load (loadline calibration enabled)
Maximus Formula (unmodded), bios 0907

12+ hours of P95 small ftts...

Q6600 G0
L737B264
Watercooled (TT Bigwater 745 with Apogee GT WB, 2xSwiftech MCW30 on NB/SB)
1.4250 set in bios; 1.416 in windows idle/load (loadline calibration enabled)
Maximus Formula (unmodded), bios 0907

Moving up!...

Q6600 G0, L737B, 3.8Ghz, 1.500vCore (BIOS) http://valid.x86-secret.com/show_oc.php?id=296699
Gigabyte X38-DQ6 F7 BIOs
Cooling - PA120.3, Dtek Fuzion (quad nozzled), Liang D5, Yate SL's on Rad

Got a new board and HSF. Have not run prime yet. Using OCCT as initial test for stability. When i get my chipset actively cooled i will run prime95 overnight.

For now:

Q6600@3.6ghz (8x450) 1.45v (L724A760/vid 1.2875)
Thermalright Ultra 120 Extreme
DFI Lanparty LT P35 T2R
2x1gb g.skill PC 6400 HZ
8800 GTS 640mb
OCZ 520watt PSU



OK I mounted a 40mm fan on the chipset and ran prime95 for an hour. I'm disappointed the fan did not make a huge difference. This thing is like double the thickness of your average 40mm fan. LAME! Looks like i'm going to have to replace the chipset cooler all together. Gotta do something about the PWM temps as well. Anyway.... Here's an hour of prime.

Finnaly I found this Q6600....with 1.3volt set in Bios with vdrop mod...Thermalright with 2 Fan SilverStone FM 121

http://valid.x86-secret.com/show_oc.php?id=301346

4005Mhz
GA-X38-DQ6 VDroop MOD.
Stock PLL
Stock VFSB
Stock VMCH
Q6600 L737B064

With just cold ambients, all inside my case (18ºC) I can do this:





This Q6600 + DQ6 has a FSB wall around 470Mhz. This same Q6600 can prime @ 510Mhz FSB on P5E3

Max stable 3dmark (X38-DQ6's fsb wall hold me back):
Note: C1E activated



This CPU is a beast. I can run 3dmark06 at this setting with only 1.58v, but sometimes it would crash on CPU test. The sad part is when I discovered that this mobo has bigger Vcore intervals after 1.60v. A pic to make you understand:



Well, I'm happy with this piece of hardware

Rbs.


PS: P5K Deluxe will never do that. Max 3dmark06 stable was 4050Mhz at same conditions.

1) Q6600 G0
2) L723A977
3) http://valid.x86-secret.com/show_oc.php?id=302706
4)
5) Air cooler, Thermalright Ultra 120 Extreme lapped
6) 1,4500v set in bios
7) Asus P5K Deluxe (no mods)

Ok.... Here it is 8+ hours prime stable:

Q6600 'G0' L724A760 (lapped VID 1.2875)
DFI Lanparty LT P35 T2R
TRUE 120 (not lapped)



Finally!! My DFI P965-S couldn't do this without rebooting.

Ok after tweaking I got it stable at 3.9 on air.

Here are the stats.


1) Post your CPU model & Core revision (B3 or G0)
Q6600 G0
2) Week (L726A...ect) FPO batch #
L741A
3) CPU-Z Validation
http://valid.x86-secret.com/show_oc.php?id=317823
4) Screen shot of it running at that speed (orthos, prime95..ect) 100% load
I've emailed them to you

5) Cooling being used
Thermalright 120 extreme

6) Voltage
1.528

7) Motherboard
EVGA 680i A1

Nothing too amazing, but:

Q6600 B3
Batch: L722A471

3.51 Ghz (9x390)
Asus P5E x38 motherboard (502 BIOS)

vCore: 1.6v BIOS, 1.496v load (Everest/CPU-Z)

Water cooled (D-Tek FuZion on an MCR320 along with an 8800GTX)

Prime95 stable (runs WCG 12+ hours a day, full load on all cores)



Eller

Q6600@4.1ghz(9x456) 1.58v (L745A817/vid 1.225)
EK Supreme (water)
Asus Blitz Extreme
4x1gb DDR3 OCZ Platinum
Gecube 3870x2
Silverstone 1kw



Happy days!

1) Q6600 G0
2) L738B065
3) http://valid.x86-secret.com/show_oc.php?id=339704
4)



5) EK-Supreme + Laing DDC Ultra + PA120.3
6) 1.5625V
7) Asus Maximus Extreme x38 [BIOS 0904]

1) Q6600 B3
2) L725A883
3) http://valid.x86-secret.com/show_oc.php?id=340927
4)

5) D-tek Fuzion + Laing DDC
6) 1.425v
7) eVGA 680i A1 - P30 bios

Craptacular, here are all the new posts since your last DB update.