OK, Got it back up to 8.5x500, Passes 10kfft's for a quick 5 minute run so far at 1.344v/1.32v Load. Same as my old board. GTL's set to 70/69/70 with VTT set to 1.109v.

Interesting part that I am sure a bios update will cure is that the board Over volts the CPU voltage by .032v, and Under volts the ram by .06v and Under volts the NB by .026v. These are not taken with a Meter, but do sorta coincide with my old settings on the P35 that were known good. Just thought I would throw that out there and will be testing overnight for a check on stability.

I have to say 1 thing tho, with the Enzotech WB on the NB, I have not seen my temp over 19C while running Orthos yet. Thats with water at about 52f in the rez tho. Great board so far!

Larry