**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[rentay]

Hi all!

Just got my system up and running! All I have to say is wow! This Abit IP35 Pro motherboard is awesome.

My specs are as follows:
Intel Q6600 SLACR (G0)
Abit IP35 Pro (running Bios 14)
Corsair Dominator 8500C5 (5-5-5-15 2.2v)
Watercooled setup
WD Raptor X 10000rpm
Pioneer DVR-215 Dual Layer burner

I just finished overclocking the cpu using Prime 95 torture testing all 4 cores (I used Prime 95 v.256).

To monitor temps I used both core temp and real temp, but from reading some responses in this thread real temp is the more accurate to go by. On water, my cpu maxed 46 degrees celcius on cores 1 & 4 and 42 degrees celcius on cores 2 & 3.

Prime95 was run on torture test set to "blend" option for 6 hours and all is stable!

My overclock is as follows:

FSB = 400
Multi = 9
DRAM Speed = 1:1.25 (DDR2-960)
PCI Express Clock = 101Mhz

Voltages:
Vcore = 1.4675
DDR 2 = 2.20v
MCH = 1.29
and the remaining voltages standard

Under Ram, I manually selected options as follows:
CAS Latency = 5
RAS to CAS Delay = 5
RAS precharge = 5
Precharge delay = 15
and remaining set to auto

Any questions please feel free to ask! This thread has been an absolute dream! Thank you!

Regards