Lian Li v2000 and v1200 thread

**nosboost300** · 03-07-2008, 12:41 PM

^^^^ to the above poster... is there a link to that... would definitely help when i wanna go water cooling and have to take off the hard drive rack on the bottom part

**Dy'nei** · 03-07-2008, 12:50 PM

Originally Posted by nosboost300

^^^^ to the above poster... is there a link to that... would definitely help when i wanna go water cooling and have to take off the hard drive rack on the bottom part

http://www.silverpcs.com/index.php?c...558b37346179a3
http://www.frozencpu.com/products/56...t_-_Black.html
http://www.performance-pcs.com/catal...ducts_id=21294
http://www.svc.com/ex-34b.html

Look around on those sites for which one you want, there are different versions for different fans (80mm, 120mm)

**Masterchief** · 03-07-2008, 01:06 PM

whats the best household cleaner product that can polish/clean up the v2000/v1000s ???

**Masterchief** · 03-08-2008, 04:14 AM

**holwill** · 03-08-2008, 05:36 AM

Thought I would share some pic's of my silver V2000+, as it is probably gonna stay like this for a while.

Far from the best camera in the world!

**dnottis** · 03-08-2008, 07:20 AM

The V1000 was really tight for water cooling, this was a buddies of mine I did for him.

Had to cut the front to allow the tubing to run to the bottom easier.

My V2000 dwarfs it.

This is my V2000.

Notice both systems can be entirely be pulled out as one. So if there is a problem we don't even have to break the loop, can just remove the blocks and pull the whole setup in a few mins.

**disruptfam** · 03-08-2008, 06:22 PM

v2000 ftw

**pet168** · 03-17-2008, 10:09 PM

in depth details, this is the earlier image don't mind the graphics card.

**emir** · 03-18-2008, 02:05 AM

Excellent paint job

**dj.oxa** · 03-18-2008, 02:10 AM

the case is excellent

**bizkit35461** · 03-18-2008, 02:40 AM

Here's my newest build:

**n00b 0f l337** · 03-18-2008, 04:49 AM

Doesn't that one look good!

**ls206** · 03-20-2008, 10:50 AM

Hey, I've just sprayed my case, rad grill and fan guard. tidied up some wires (and managed to toast my fan controller....my ears are bleeding!!!!!!!!)
enjoy

hope there's not too many

**Jedda** · 03-20-2008, 10:11 PM

Pet168,
Mate, you so need a red desktop. The blue on your monitor clashes badly.
Like your schema!

**pet168** · 03-21-2008, 07:07 AM

Originally Posted by Jedda

Pet168,
Mate, you so need a red desktop. The blue on your monitor clashes badly.
Like your schema!

thanks mate, that one you saw is not my welcome screen...maybe ill change my desktop to red/black combination. thanks for the suggestion

**pet168** · 03-21-2008, 07:17 AM

additional images

**dreamten** · 04-07-2008, 06:06 AM

Just built a new machine and thought I'd post it on here. I spent several weeks perfecting it -- sleeving all cabling, cutting fan wires to their precise length, and so on. I'm using it mainly for graphic design, but I also do a little gaming every so often. My goal was a clean, professional looking exterior/interior that did not look like a home made machine. So no fancy LEDs, cathode tubs, or acrylic windows... this machine is all business.

Lian Li PCV1000
e8400 @ 4.0ghz / TRUE 120 / 27c idle / Both lapped
8800gtx @ 675mhz / HR03 GT / 48c idle / Both lapped
4 x 150GB Raptor / Raid 5
Asus P5E Motherboard
PC Power & Cooling 750watt Silencer
2 x Sanyo Denki Ace Fans
4 x Yate Loon SL Fans

**Feichti** · 04-19-2008, 06:50 PM

Originally Posted by Delirious.

These are in silver and I need black. I could probably paint them. I will look around on those sites

http://www.performance-pcs.com/catal...ducts_id=21092

Here the one in Black

And here my big Fileserver.

and in the near future the CPU,RAM, Raid-Controller are getting Watercooled

Feichti

**Yeknom** · 04-19-2008, 07:50 PM

Watercooling the RAID controller? Ambitious.

**biftek.** · 04-19-2008, 08:02 PM

Somehow, the while led's make your set up not look as bad even with the miles of cables

Good job!

**Jor3lBR** · 04-20-2008, 03:05 PM

Originally Posted by kinghong1970

since we're all LianLi lovers...

here's mine...
finished profile shot...
my HDD wiring...

radiator is a MCR320 btw...

Nice Rig

Where those SATA cables come from? Are they reinforced cables?

**kinghong1970** · 04-21-2008, 03:57 AM

Jor3lBR, i purchased those SATA cables off either Performance PCS or FrozenCPU...

i believe they were these...

**Jodiuh** · 04-28-2008, 10:20 PM

Wow, that looks nice! The Maximus and maybe all ROG hav the double stack SATA and even when the clip's removed the $3 SATA's from the egg, plastic starts bulging.

So I'm currently using the groovy red attention grabbers. Anyone have recs on some good quality SATA's wo/ clip?

**cabbspapp** · 04-28-2008, 10:52 PM

Dreamtem, how is your San Ace staying on your TRUE?

**dreamten** · 04-30-2008, 06:14 AM

Originally Posted by cabbspapp

Dreamtem, how is your San Ace staying on your TRUE?

I used zip ties and ran them through 2 holes on the fan. The pointed end of the zip tie is run through the whole and in between the fins on the heatsink, then I take another zip tie and attached it to the pointed end. Then I cut off both ends of the 2 zip ties. I did this on 2 corners of the fan and it holds in place quite nicely, and it almost looks like the fan is floating in place.

IMO it's a much cleaner solution than using the Thermalright wire bracket. Just make sure you use fairly thick/strong zip ties. Also, the sound proofing material I placed underneath it actually touches and supports the heatsink, so the zip ties and motherboard aren't being stressed from the weight.

Thread: Lian Li v2000 and v1200 thread

Thread Tools

Search Thread

Rate This Thread

Display

My Rig

Bookmarks

Bookmarks

Posting Permissions