Water Cooled Case Gallery

**Pedalmonkey** · 02-29-2008, 04:33 PM

yeah, but the mods really easy y pay the extra 20 bucks??

**supa-fly** · 02-29-2008, 06:49 PM

OK... So this is what ive got at the moment...

Gonna be getting some EK stuff soon... Gonna make a Single Loop consisting of a Tripple RAD, a Double RAD, and a Single RAD. Blocks gonna go between RAD's and also gonna add a 288 Watt Peltier to the loop to chill the liquid.
Peltier will get cooled by a CM Gemini.

**boomstick68** · 02-29-2008, 08:33 PM

My first attempt at water cooling. Antec P182 case.

**rbsmontemor** · 02-29-2008, 08:44 PM

Now with MCR120 on the loop:

Sorry for the crappy pics this time

Girlfriend sleeping here today

( Yeah I know, what I'm doin here on computer?

)

Rbs.

**Fitseries3** · 02-29-2008, 08:49 PM

where did you get the x48 from?

**Pedalmonkey** · 02-29-2008, 08:51 PM

yeah, and how does it clock?

**rbsmontemor** · 02-29-2008, 08:55 PM

Originally Posted by fitseries3

where did you get the x48 from?

I bought the X38-DQ6, the box says X38...but the board says X48

Originally Posted by Pedalmonkey

yeah, and how does it clock?

Exactly as X38 do, had one GA-X38-DQ6 and they are the same

Rbs.

**peebee** · 02-29-2008, 11:49 PM

**msgclb** · 03-01-2008, 02:23 AM

Originally Posted by Sonicfury

Those tubespirals are realy UV reactive aint they, Looks pritty ace mate!

Just got mine done today ( got rid of the crappy LCS kit)

You wouldn't happen to have some pictures showing how you modded that TT case to put that radiator on top. Does it interfere with the door over the top ports? After taking a close look at mine I'd guess it does. What are you using to mount it with?

**Sonicfury** · 03-01-2008, 03:51 AM

Sure, I havnt drilled the holes yet since i diddent have the right drills at the time but im also trhinking about getting new screws cause either the screws arent wide enough or screwholes on the rad are verry crap cause 2 out of 4 are realy wobly and unstable and dont even go in far enough!. If other screws dont sort it ill prolly take off the top and mout it with 1 or 2 fans on top of eachother

Mounting pieces: http://www.aquatuning.de/product_inf...-4-St-ck-.html

Front: (as you can see it would fit but it will be tight) You can see my problem with the rad holes /screws on the left screw.

Back:

**ownage** · 03-01-2008, 10:01 AM

Originally Posted by supa-fly

LOL, didn't know INTEL had waterblocks. Do you have any specs on you're watercooling? rad, pump blocks etc?

**Vatos_locos** · 03-01-2008, 10:03 AM

it looks like thermaltake Aquagate or something

**M@deira** · 03-01-2008, 02:55 PM

My case Enlight Full tower server

Thank's

**Arni** · 03-01-2008, 03:23 PM

M@deira nice UV color

**Waterlogged** · 03-01-2008, 03:45 PM

Originally Posted by ownage

LOL, didn't know INTEL had waterblocks. Do you have any specs on you're watercooling? rad, pump blocks etc?

I don't think it is Intel cooling. It looks like a Cooler Master Mini Aquagate 80 or 120 with an sticker from a stock Intel cooler on it.

**Arni** · 03-01-2008, 04:21 PM

Originally Posted by Waterlogged

I don't think it is Intel cooling. It looks like a Cooler Master Mini Aquagate 80 or 120 with an sticker from a stock Intel cooler on it.

I think that is just Intel sticker

**[XC] NetburstXE** · 03-01-2008, 08:32 PM

@Sonicfury How well do the tool-less PCI slot retention mechanisms work with dual-slot cards?

**supa-fly** · 03-01-2008, 09:04 PM

LOL... yes its just an Intel sticker on my CM Aquagate Mini 120 Pump/Block.
Theres two pumps in the system... just for redundacy. Had to put that
sticker there, it looks piss cool under the UV

**Sonicfury** · 03-02-2008, 06:16 AM

Originally Posted by netburst

@Sonicfury How well do the tool-less PCI slot retention mechanisms work with dual-slot cards?

Soo good that i dont use them

**dnb#** · 03-02-2008, 08:08 AM

I found out how to use my digital 5mp camera on a low ISO

Click image for larger version.

Name: 1.jpg
Views: 2486
Size: 198.2 KB
ID: 73271

Click image for larger version.

Name: 2.jpg
Views: 2465
Size: 131.4 KB
ID: 73272

Click image for larger version.

Name: 3.jpg
Views: 2453
Size: 109.1 KB
ID: 73273

Click image for larger version.

Name: 4.jpg
Views: 2446
Size: 189.5 KB
ID: 73274

**~~Xilikon~~** · 03-02-2008, 10:28 AM

Originally Posted by Waterlogged

I don't think it is Intel cooling. It looks like a Cooler Master Mini Aquagate 80 or 120 with an sticker from a stock Intel cooler on it.

Actually, I do remember Intel doing some research for a sealed watercooling system to tame the Prescott heat. I dunno if they are sold or if it is one of the few prototypes.

**Håkki** · 03-02-2008, 12:38 PM

Originally Posted by dark-redeemer

Which RAM block do you have?

**smee** · 03-02-2008, 01:16 PM

Originally Posted by Håkki

Which RAM block do you have?

Its's custom built by a member here on XS.

**brianm602** · 03-02-2008, 04:49 PM

I know it is not as extreme as some of the cases I have seen but it works for me and the performance is great.

My current water cooling system:
D-Tek Fuzion CPU block
Swiftech MCW30 chipset block
Swiftech MCR-220 radiator
Swiftech Hi-Flo Reservoir
Laing D5 variable 12v pump
Masterkleer 7/16" ID clear tubing (8 feet)
Swiftech HydrX & distiled water
Vantec 53cfm, 28dBa, 120mm 'Stealth' fans on radiator
Flow order: res-pump-rad-cpu-nb-res
Martins estimated flow rate: 2.08 GPM!

I replaced an old Swiftech Apogee GT CPU water block with the better flowing D-Tek Fuzion and removed a Swiftech MCW60 on a x1900xtx, as a result both my flow rates and cooling capacity have increased.

I know I need a bigger case but I just cant pry myself from my Lexa.

**smee** · 03-02-2008, 05:31 PM

Wow, Brian. That looks awesome!

Good idea to put all your main watercooling equipment up top!

BTW,

to XS!!!!

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

My Water cooled NZXT Lexa

Bookmarks

Bookmarks

Posting Permissions