Water Cooled Case Gallery

[Utnorris]

Looks good. I think your wire management looks good considering you have large power cables like I do and they are hard to hide. I am not sure how people run their power cable under the mother board. Mine is nearly 1" thick and there is no way it would fit under my motherboard without major modification or bending the board. Sucks about your processor and video card, now you have a good reason to upgrade to a newer card like the 9600GT, .

Utnorris

[Xiphoid]

Looks good. I think your wire management looks good considering you have large power cables like I do and they are hard to hide. I am not sure how people run their power cable under the mother board. Mine is nearly 1" thick and there is no way it would fit under my motherboard without major modification or bending the board. Sucks about your processor and video card, now you have a good reason to upgrade to a newer card like the 9600GT, .
Utnorris

I actually ended up getting a xfx 8800gt 512. But... I'm thinking about getting a super fine solder tip and try to get the capacitor back on to ebay or craigslist it.





Also, fitting the side back on was a real pain without causing warping of the sidepanel. I had to dremel the plastic on some of the molex connections down a little thinner so the side wouldn't bow. (Bowing P180 panels isn't pretty.) I'll try to put up a picture of my current cables, but my rev1 version is below:

[rabor]

Here's my liquid-cooled gaming rig :

Congratz on an (-other) excellent build!

I'm still struggling to get my first Soldam/Windy to the Netherlands, & you own 10!?! (or 12?).. that's not funny..

May I ask where you ordered or bought them? Tx.

[dualbrain]

Amazing new systems on the last pages!!! Windy-Man: beautiful reds!

[joecop120]

Cool, i want watercooling kits that make people gay to



I just had to

I was thinking it leaked and destroyed his PC...

[Utnorris]

Ok,
So i made a few minor changes like swapping out my coolant. Tell me what you think, obviously it isn't as nice as some of the ones on here, but I like to think of it as form with function. I am currently running at 3.6Ghz (8x450fsb) and my temps are at 37 celcius at idle and 55 celsius with Everest and P95 running. My ambient is around 23 celsius. I will take any criticism or suggestions and do what I can.
Thanks for looking,

Utnorris

P.S. This is my first true w/c system, I don't consider my Swiftech H120 compact that I ran for less than 2 weeks a true w/c system.

[Yeknom]

looks good utnorris!

[Utnorris]

Thank you, I wish I could do more with wire maintenance, but with this board and this case there just isn't a whole lot I can do without doing some major mods.
Anyways, thanks again,
Utnorris

[Zgradis]

^^ i made them , just some sleeving thats all, and i added that SATA power connector to to my molex line on my PSU

@disruptfam: everything is done in photoshop, aside from computers im a professional graphic artist (ie. 3D, CAD, Photography) comes in handy for presentation purpose.

@rioja: yea i broke the took one, but i ordered some new clips which are coming in with the wed shipment

@everyone else: why yes, it is a TJ07

What brand sleeving and where'd ya get it from? I hope your in the US...

[ChaosMinionX]

**UPDATE**




This went to UV cathodes, got rid of the blue...it looked tacky, redid wiring etc etc.... I will bust out my D80 here soon as my replacement RAM gets here, and I will get up some real shots of it, this pic simply does not do it justice.

[Sonicfury]

Those tubespirals are realy UV reactive aint they, Looks pritty ace mate!

Just got mine done today ( got rid of the crappy LCS kit)

[Waymon3X6]

Chaos that's a nice lookin rig! Is that with your 2 3870x2s? Post some pics of the inside!!!!!!

[NickS]

Those are 2900XT's

[Sonicfury]

I think he meant Chaos, he has 2 3870X2's i by looking at the power cords

[dark-redeemer]

[rafwlkp]

Great photos, great system

[ChaosMinionX]

I think he meant Chaos, he has 2 3870X2's i by looking at the power cords

Yep, I will post some more pics today.

[sparks]

elpibe10 you say you have this

Pump & Reservoir : Swiftech MCP350 with EK-DDC X-RES 100
Great that is what I was wanting but then in the drive cage there is s swiftech with a different reservoir...what is that?
Did it not work out so you changed to a different reservoir?
I clicked on the pic and it says AltiumVR1000BK-Pump.jpg....never heard of that

I am trying to get everything into an ANTEC 900 junk case (please no one else buy one of these...I gave $40 and after taking it apart I thought DAMN $39 too much)

Overall that red case is one of the best I have ever seen GREAT JOB (remember this complement is from a water noob LOL) but it still looks awesome

[lennox]

lol patience patience! im waiting for my last shipment! which is next weds

in the mean time TEASERS!

odd question but, just curious if those knobs came with your controllers?

[maxxxpct]

my integration...
case silverstone GD-01MX


mobo asus striker
cpu quad 6600 G0
video nvidia 8800 gtx
creative x-fi platinum
enermax 1000 galaxy
dvd
hd.. 2 raptor 74 gb in raid 0
2 x 320 gb storage
cooling cpu ybris acs black pearl
cooling videocards ybris k7
pump swiftech 655
radiatore 3 ventole....
vaschetta flow trap.


ybris acs black pearl

[ChaosMinionX]

odd question but, just curious if those knobs came with your controllers?

Looks like a stripped sunbeam rheobus, that was painted.

[dualbrain]

@maxxx...
That looks like a really tough rig

[PilatuS]

Little update with a XFX 8800GT cooled by an EK waterblock.

[~aoe~]

Looks like a stripped sunbeam rheobus, that was painted.

I agree it's a sunbeam rheobus, but I think it's had a Lian-Li 51/4" cover attached. Peebee did the same, and I'm gonna give it a try also.

[shazza]

I agree it's a sunbeam rheobus, but I think it's had a Lian-Li 51/4" cover attached. Peebee did the same, and I'm gonna give it a try also.

You can also buy them: http://www.performance-pcs.com/catal...oducts_id=3227