**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[mrcape]

Set n/2 to enabled. e8400 won't do 9.5, so set it at 6, 7 or 8 and then enable n/2.

[mrcape]

I have the HC3DC's, 2x1Gb. You can checkout how they did here -> http://www.xtremesystems.org/forums/...d.php?t=177531

Great memory for 4-4-4-4 IMO. They wouldn't stay memtest stable at 5-5-5-15, 600Mhz, performance level 7 but 5-5-5-15 sucks anyway

Nice sticks man!

[.:R32]

Set n/2 to enabled. e8400 won't do 9.5, so set it at 6, 7 or 8 and then enable n/2.

I am trying to get 8.5x, thanks I will try this

[emoners]

Anyone using Team Group memory here?

I have a kit of TXDD2048M800HC4DC coming and I want to try it on this board. Pretty sure this is d9 gmh.

i have the Team GKX...no prob here...
650MHz @2.15v

[mrcape]

At 2.15 wow, that's great, thanks for the reply. I got the 6400s and I'm hoping these can meet what the Gskill HZ 6400s I have can do. The Gskills are starting to need more volts. I'd love to get more of them as well but they're sold out and price gouged.

[mad_skills]

Thanks bro!

No problem mate, here's what they/it did, these are all SPi1M 100% stable results, though the results themselves are not competitive.
So the ram is TeamXtreem PC6400 4-4-4-10 @ 2.2V (TXDD1024M800HC4DC), i used 1:1(333/667 i think?) strap for CL3 overclock and 4:5(266/667) strap for CL4.

800MHz CL3-3-3-8 @ 2.31V


850MHz CL3-3-3-8 @ 2.45V


900MHz CL3-3-3-8 @ 2.68V


1000MHz CL4-4-4-4 @ 2.31V


1150MHz CL4-4-4-4 @ 2.55V


1200MHz CL4-4-4-4 @ 2.75V

The interscores i won't put but the settings were, for 4-4-4-4 CL settings, 2.61V for 1161MHz, 2.63V for 1171MHz, 2.66V for 1181MHz and 2.71V for 1191MHz.
Not so bad, although the voltages are a bit high for these are D9GMH microns..
Hope it helps.

[mrcape]

Hey, that's very helpful thanks! It gives me a range to consider when I start to use these in this board.

[mad_skills]

Hey, that's very helpful thanks! It gives me a range to consider when I start to use these in this board.

Nothing to it.
I didn't do CL5 because it's obvious that they can pull off some heavy MHz, CL4 and CL3 is what i was really interested in.

[Mav451]

Hrmm, all this talk about RAM has me thinking I can change my Ballistix from cas 5 back to cas 4 (since I don't intend to OC further). I wonder...

And then somehow, I doubt RAM timings will show up much at all in real world performance, considering Intel's MO is bandwidth, not latency.

[toosas]

i'm shattered..
right, bought an p35-t2r,
e8500,
corsair pc-6400 4-4-4-12 x2
8800gt 512 and a 700w arctic power psu.

getting a constant reboot loop with 8 pin and 4 pin rails, just tried different psu, same story. if the 8 pin rail is disconnected it stays up,
code 88. no output to the screen in neither case. all fans spinning, no beeps whatsoever. cleared cmos, battery out, tried w/o ram n cpu - no luck.
will try to see if the e8500 and ram is still alive.. n try to send the mobo n psu back.
any similar experience?

[mrcape]

That's a bummer, mine has been like a rock.

Did you get it up at all or was it like this from the get go? I've never tried an Arctic PSU, what was the other you tried? You need a solid psu with that system.

Also, are you sure you have a speaker in the case?

[Praz]

i'm shattered..
right, bought an p35-t2r,
e8500,
corsair pc-6400 4-4-4-12 x2
8800gt 512 and a 700w arctic power psu.

getting a constant reboot loop with 8 pin and 4 pin rails, just tried different psu, same story. if the 8 pin rail is disconnected it stays up,
code 88. no output to the screen in neither case. all fans spinning, no beeps whatsoever. cleared cmos, battery out, tried w/o ram n cpu - no luck.
will try to see if the e8500 and ram is still alive.. n try to send the mobo n psu back.
any similar experience?

Using a 65nm CPU update the BIOS for 45nm support.

[toosas]

the speaker is present, tried a hiper power one which is running a q6600 and a 8800gtx plus 3 hdds. code 88
never got it running. its just 3 days old. if the mobo hasn't killed the e8500, i might brave it and put the q6600 to see if it posts n if lucky to update the bios?
will keep you informed. shed me some more ideas in the mean time

[cantankerous]

Yea seems to me the bios needs an update. Try the latest 2/15 beta as it works very well and has pretty much 100% support for the newer 45nm cpu's do to its updated microcode recognition and proper VTT voltage tables.

[mrcape]

Your day is going to get much better!

[mad_skills]

Hrmm, all this talk about RAM has me thinking I can change my Ballistix from cas 5 back to cas 4 (since I don't intend to OC further). I wonder...

And then somehow, I doubt RAM timings will show up much at all in real world performance, considering Intel's MO is bandwidth, not latency.

Yeah, that's why for 24/7 i just find the highest MHz for CL5, 'cause CL5 doesn't need that much voltage and leave it. I take CL4 and CL3 only for testing and benchmarks.

[mrcape]

These Team Group Ram run great, just about identical to the G Skill. Supposedly they are both D9GMH (B3-6). Good thing these are 30% the price and in stock. The fact that they are performing the exact same also tells me that my GSkills have not faded at all. Time for more V!!

Running 4 4 4 4 1000mhz with 2.19 st in bios. I have not had much luck going over 1100, but I don't pump that much voltage to them so... I'm liking a solid 8.5x500fsb with tight timings. Fifty bucks!

I have been testing a lot and this board is delivering, very solid. I hope RAM talk isn't mucking up the thread, but I feel it's interesting to know how certain other products play with the board.

[mad_skills]

What is the nominal voltage your Team's are rated for? For mine it's 2.0-2.2V.
2.19V for 500MHz CL4 is a nice score dude.
Mine were alse dead cheap...

[mrcape]

Same this 2.0 - 2.2v

[mad_skills]

If you want to push them a bit, voltage wise, just make sure you put a 120mm fan to blow onto them to keep them cool, they won't mind the voltage, well at least my didn't...

[WoZZeR999]

I just got one of the $200 Q6600 from Microcenter, and I got a 1.2375 Vid chip, I will be testing it to what it can do.

EDIT: So far, I've got it at 3.8 @ 1.52, it's running a little hot, but I haven't tweak anything yet.

[fireice2]

been out in a while, been busy preparing for a lanparty.

I had Team Xtreems DDR2-1066 as well. Max rated voltage 2.3-2.4V

[Hazzan]

I just testing DFI LP UT P35 T2R......with my E8400 on air !!! nice Board

http://valid.x86-secret.com/show_oc.php?id=318236

[mad_skills]

been out in a while, been busy preparing for a lanparty.

I had Team Xtreems DDR2-1066 as well. Max rated voltage 2.3-2.4V

Can you post some scores with your Team's, if you have them, tnx.

[fireice2]

Haven't got much time to play around with my rig recently coz of my piling exams.

That run was made in vista32.