Quote Originally Posted by road-runner View Post
I flashed the pro to xt and OCed the cards individually, I pulled a card and used one at a time. I got 980/1070 out of the pro (flashed), the xt card I can not go over 940/970 or it freezes in 06 when the monster goes under the boat, the same place every time. As far as the RAM sinks I put EnzoTech BMR-C1 Pure Forged Copper Ramsinks on the memory chips (16 ea. card) and 4 Swiftech MC21s to go on the voltage regulators or what ever there called...

Edit: Before I flashed the pro I tried to run 06 and it gave me a message saying to use 03 or 05 because that card did not support the pixel shaders or something...
im going a very similar route it seems but im probably going to put a few more sinks on other things as well. as for your mem not going over 970 its seems like the same problem i had. perhaps you got a 1.0 hynix bios when you probably have 1.1 like i do.

try modding these bios'

http://www.techpowerup.com/vgabios/9...12.070405.html
http://www.techpowerup.com/vgabios/9...12.070518.html

one of those 2 will allow you to clock your mems above 970. i would try the club3d one first *lower one* as i suspect you would have a higher chance of success

seeing these gpu clock speeds makes me anxious about the parts that are coming in