How do you up the voltage on the 3850, I can't find any tutorials for that mod
How do you up the voltage on the 3850, I can't find any tutorials for that mod
No way to make a bios with modded vgpu values?
I'd like to have one at 1.5V.
Thank you,
bye
the hardmod is the same as the 3870.Originally Posted by KainXS
i need help
i have just got myself a 3870 and no matter what i cannot get passed the 860 wall,
The BIOS's i have used are from techpower up and from here http://www.iax-tech.com/video/3800biosmod/03.htm
They all flash fine but i cannot get passed that 865 wall, but this screen shot makes things sooo much more confusing, do i trust CCC or ati tool ?
I'd do a hard mod for voltages but i dont thing it'll help.
Would i need to get the volt mod done to get passed this stage? if so its not a problem for me
Last edited by Pants; 12-07-2007 at 08:57 AM.
Try the unlocked bios mateand then Vmod
http://www.xtremesystems.org/forums/...d.php?t=166334
Last edited by MorGo7h; 12-08-2007 at 11:44 AM.
System: E8400 // P5Q-E // Ballistix // HD3850 // HX520 http://valid.x86-secret.com/show_oc.php?id=419486
Thermochill pa120.3 // D-tek FuZion bowed+ costum nozzle // MCW60 // EK150 // dcc1 18w w/top
I had a club3d card that would not even go past 850 850 is bearly stable. The other 2 cards run 850-1200 fine.
System Specs: -=Game PC=- | -=Lan Box=-
subscribed
DNA = Design Not Accident
DNA = Darwin Not Accurate
heatware / ebay
HARDWARE I only own Xeons, Extreme Editions & Lian Li's
https://prism-break.org/
Sincere thanks to the OP for helping my card kick some serious azz on air.
Set to 890/1404 in Riva
http://service.futuremark.com/compare?3dm06=4114880
Code:ASUS Maximus II Q6700 ZIPPY GSM-6600P (G1) Ballistix PC6400 Sapphire HD4870
I was thinking my cards were pretty good with 930/1340 but yours1404Mhz on mem is really kick ass for a stock card (I assume it's with stock voltages)
Bye
p€p|n0r@ng
The visiontek 3850 i have wont go any higher than 773 (769 in gpu-z) without artifacting. I had assumed it was a power issue, but maybe it is a bios issue?
OK I have a HUGE question...I have been trying to figure this out =/3850 still clock lock
3870 is unlock bios
i have few bios in here to download
HD3850
770/975
760/950
HD3870
875/1250
860/1200
830/1200
(UVD clock overclock too)
also the overclock range for 3870 to up to 1500 / 1400
http://www.iax-tech.com/video/3800biosmod/03.htm
I started editing my own bios's for this card (yours work fine for me)
Im doing vgpu settings edited into the BIOS in addition to your stuff...
I have a 3850 256MB...all my bios's even if I edit my stock one WILL NOT get my card to boot up =(
Im thinking this happens cuz the BIOS needs its own correct some sort of checksum value...
I looked at your 2 3850 BIOS and they work great...I did a hex comparison in them to each other and of course found the OC section you changed settings on....
But I saw 2 other areas one was bigger where the code was different. They were in same locations and Im tryin to figure if its these locations that need to be changed so the modded bios will work? are these the checksum values or something????
Anyways, will you please tell me HOW to change these areas appropriate to the settings I specificy in clocks / voltages so it will properly work on my card like yours do?
Thanks..
works great I have flashed 830/1200 to test now I can easily get higher core clocks
| Abit IX38 Quad Gt | Intel E8400 @ 4.23 Ghz 470 x 9 | Kingston Hyper X 9600 @ 940 Mhz 4-4-4-12 | Powercolor 3870 X2 + Sapphire 3870 Triple Crossfire | SilverStone Strider 750W | Samsung 226Bw | CM Stacker |
nice work!!!
my card in crossfire!!
i send one private mail to you for the new bios 950/1300!!
thanks!!
My cards seems to work fine with the 830/1200 bios
[SIGPIC]http://techsweden.org[/SIGPIC]
Gigabyte Z87X-OC, Haswell 4770K, 8GB Team Group 2666mhz, Asus HD7970
what's your mobogreat fsb you got.. dq6 sucks after 490 fsb
Last edited by -GobliN-; 12-22-2007 at 11:41 AM. Reason: writing mistake
| Abit IX38 Quad Gt | Intel E8400 @ 4.23 Ghz 470 x 9 | Kingston Hyper X 9600 @ 940 Mhz 4-4-4-12 | Powercolor 3870 X2 + Sapphire 3870 Triple Crossfire | SilverStone Strider 750W | Samsung 226Bw | CM Stacker |
Great clocks SN!
MB Reviewer for HWC
Team OCX Bench Team
I can bench (3d mark 2006) 920/1290 [both card] with this bios stock cooling but my e6600 lowers my sweet points
| Abit IX38 Quad Gt | Intel E8400 @ 4.23 Ghz 470 x 9 | Kingston Hyper X 9600 @ 940 Mhz 4-4-4-12 | Powercolor 3870 X2 + Sapphire 3870 Triple Crossfire | SilverStone Strider 750W | Samsung 226Bw | CM Stacker |
any unlocked bios for the 3850's ? i have one sapphire and whatever Vgpu i'am using i can't pass 869Mhz
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
yeahp head on over to my thread for the 3850 256MB custom bios's Ive been editing the unlocked version of bios for several people now...
http://www.xtremesystems.org/forums/...d.php?t=169778
v71 unlocked bios attached...stock clocks 1.333v VGPU
thanks man
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
@ guess2098 Thank you very much for the great work you have put into you Bios for these Cards
Thank you ......Campbell
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Is there an unlocked bios for the 512MB 3850's? All the posts I see seem to be for the 256 version. Thanks
Ok I've found a solution for Gigabyte HD3870 512MB DDR3 Qimonda....
Original Ver 70 locked bios 1.22V
at 859/2100Mhz
Used a Sapphire 3850 512MB DDR3 Qimonda Bios
Ver 71 Unlocked Bios 1.22V ( http://www.techpowerup.com/vgabios/2...12.071108.html )
+ Editor to set 1.22V 2D and 1.32V 3D And now I got 1.38V in Multimeter
@895/2100Mhz
( http://www.computerbase.de/downloads...tor/?url=17592 )
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Careful, Sapphire Bios 71 has no auto fan control. I had to go to HIS Turbo X Bios to get the fan to work without Riva Tuner.
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
Great, I too have the Ultra Durable GDDR3 version of the Gigabyte 3870 (GV-RX387512H) and was looking for a solution to raise the low stock voltage and to get over the clock lock. Currently, my card is at 850/1025Mhz (855/1031Mhz) with the stock BIOS. Any higher on the RAM and I can see yellow artefacts in ATI Tool's Artefact Finder, although these are not detected. Overdrive in CCC gives a blank screen with the core at or above 865Mhz.
Is there no solution to modify the stock BIOS to get higher voltage and to remove the clock lock?
I MSI P67A-GD65 I Intel i5 2500K I 8Gb Samsung I
I Corsair F3 60Gb I AMD 6850 I Dell SP2208WFP I Windows 7 x64 I
I Current Speed: 4.5Ghz I RAM 1866Mhz @ 9-9-9-27 1T I
I Laptop I Acer 1830T I Intel i5-470UM I Crucial M225 I 4Gb DDR3 I
Posting Permissions
Reply With Quote
Bookmarks