2008 XS Cheapazchips 3D challenge

[SpikeP]

well i had the same idea with the memory, and the leadtek starts with a 500mhz core and 500(1000) memory. couple of websites say it is 2ns memory as well, although no one mentions the brand of it...

anyways, full height card wuld help on after market cooling, but i am planning to try and fit a old skt 939 aluminium cooler on it, so think i could manage that on the half height as well. i think i will grab the leadtek. Then we have another manufacture and design in there.

- Paul

[oohms]

well i had the same idea with the memory, and the leadtek starts with a 500mhz core and 500(1000) memory. couple of websites say it is 2ns memory as well, although no one mentions the brand of it...

The ones at work (the extreme edition ones) have 2.0ns quimonda ram... im tempted to buy one of those as well

[\/ENDE][A]

I`m in on this , sounds like a laugh
My card will be here before the end of the week.

[STEvil]

Picked up my Asus today, Quimonda 2.5ns on it...

[zakelwe]

Welcome \/ENDE][A

I bench more this weekend. I'll try some LOD runs and other texture reduction at stock speeds as my othe score to get a feel for percentage gain from these.

Regards

Andy

[Johnny Bravo]

*sigh* Amazon is taking its sweet ass time to get my card to me, was supposed to be here by now

[GOESA]

Picked up my Asus today, Quimonda 2.5ns on it...

Damn, gonna pick mine op tommorow, hope they clock allright.

/Grau

[STEvil]

15,736 3D01 using drivers off the CD on a way old WinXP Pro-32 install and no overclocking on the GPU.. E4300 @ 3ghz with 4x1GB 5-5-5-x 667mhz.

Downloading latest version of gpu-z now and rivatuner for some overclocking on stock air

[dinos22]

lol only two results so far

i ended up asking oohms to get me a Gigabyte and mod it afterall

waits for oohms to send it over

[SpikeP]

Well i am ordering mine tomorrow.

Leadtek 8400GS 256MB TDH Extreme

probably gona need some help with the vmods on that. Expect stock results by end of the week. possibly light overclock results as well.

Will ask about mods when i get the thing here, and take pics. Is everybody else waiting for theres to arrive?

Heres to hoping it has 2ns memory

[oohms]

Just a heads up for you guys, i got another gigabyte 8400GS with hynix (for dinos) which only gets 480 ram, so they don't all clock the same

(dw dinos ill get a better one )

[Deanzo]

You can put my name down, I'll play!!

[dinos22]

Just a heads up for you guys, i got another gigabyte 8400GS with hynix (for dinos) which only gets 480 ram, so they don't all clock the same

(dw dinos ill get a better one )

pulls out the black(errr good) book on oohms heh
thaaaaaaaaaaaanks DUDE hahahaha

[dinos22]

You can put my name down, I'll play!!

lol watches Deanzo destroy '01 with his 5.9Ghz chip (not sure it will matter match but it would be funny just for kicks)

[STEvil]

675/1350/434 seems max (er, close to ) I can do on stock cooling no vmods with the asus card and quimonda. 19.6k 01.

http://service.futuremark.com/compare?2k1=9330368

edit

6988 '03 http://service.futuremark.com/compare?2k3=5720375

[Deanzo]

lol watches Deanzo destroy '01 with his 5.9Ghz chip (not sure it will matter match but it would be funny just for kicks)

Just for you, I'll do it at some point this month

This is just to get something on the board,

3D01: 24243, http://service.futuremark.com/compare?2k1=9330371

3D03: 7847, http://service.futuremark.com/compare?2k3=5720378

[dinos22]

i should be able to have a 600*9.5 LN2 bench as well from my latest chip

we'll see if DDR3 and high FSB do anything hehehehe

[GOESA]

675/1350/434 seems max (er, close to ) I can do on stock cooling no vmods with the asus card and quimonda. 19.6k 01.

http://service.futuremark.com/compare?2k1=9330368

edit

6988 '03 http://service.futuremark.com/compare?2k3=5720375

My god, thats some bad ram Damnit chose the wrong card then, well I am gonna bench it anyways

/Grau

[STEvil]

If we can figure out how to edit timings we might get somewhere with them... other than that, feed them volts lol

[[XC] gomeler]

Your ram clocked just like my ram but I've got 2.5ns Samsung DDR2 here. With my ram increasing vdimm from 2.08v to 2.31v did absolutely nothing, still walls/artifacts at 432MHz. Tomorrow or the day after I'm going to try nibitor and see if I can manually loosen the timings, otherwise my 900MHz core is useless

[zakelwe]

Welcome Deanzo and nice work to go second staight away.

I've updated the front page, thanks everyone for putting details of timings etc up, it makes editing easier. Note that I am cutting and pasting and so might make mistakes ( especially after a few ), so if anyone spots bloopers please post so I can change.

Also note that I have only included 5 in the leaderboard currently to avoild me spending hours all day updating it, but I intend to try and stretch it out to top 10, maybe I will just put top scores of people below that, depending on how much time I have. I might split it further to split AIR COOLED from ANYTHING GOES as well depending on how many Anything goes we have.

Finally, this competition allows you buying another card if yours blows or the card really sucks of course so feel free to do that if you have a howler on your hands. That's a great advantage of these little ones.....

Regards

Andy

[Deanzo]

Welcome Deanzo and nice work to go second staight away.

Thanks mate,

Sorry to post so soon, Had to test the Vgpu & ram voltage pencil mods

3D01: 25504, http://service.futuremark.com/compare?2k1=9330433

3D03: 9163, http://service.futuremark.com/compare?2k3=5720564

[GOESA]

Nice I wish I could get a gigabyte here in Denmark

Good work Deanzo.

/Grau

[Johnny Bravo]

Hey guys my card arrived today and disappointingly its Qimonda memory so I'm pretty pessimistic on its headroom

It's a Leadtek card and the main GPU controller is the RT9259A, VGPU mod isn't difficult and there is the option of controlling the current limit too which may be useful. I'll know more when I get back home tonite and give it a good look over.

[GOESA]

Hey Guys, Benching mine right now, 670/1380/452mhz I would like to know how I get a higher Bar on the Shader, its maxed in the rivatuner control, and i think it has a great impact in the score so please help me raising the bar in rivatuner.

/Grau