2008 XS Cheapazchips 3D challenge

[zakelwe]

Hey Guys, Benching mine right now, 670/1380/452mhz I would like to know how I get a higher Bar on the Shader, its maxed in the rivatuner control, and i think it has a great impact in the score so please help me raising the bar in rivatuner.

/Grau

Hi Grau,

There is a power user setting for this, you can multiply it by a certain amount, like 1.33, and it will shoot higher.

Regards

Andy

[dinos22]

Hey Guys, Benching mine right now, 670/1380/452mhz I would like to know how I get a higher Bar on the Shader, its maxed in the rivatuner control, and i think it has a great impact in the score so please help me raising the bar in rivatuner.

/Grau

i normally forget that stuff and find it somewhere on VRZone
check this thread
http://forums.vr-zone.com/showthread.php?t=56017

and this one
http://sg.vr-zone.com/articles/XFX_8...ture/5462.html

[zakelwe]

Check out this puppy

http://en.expreview.com/?p=199

G98 based card to be released soon. That RAM speed makes you want to cry doesn't it!

Regards
Andy

[dinos22]

Check out this puppy

http://en.expreview.com/?p=199

G98 based card to be released soon. That RAM speed makes you want to cry doesn't it!

Regards
Andy

you better make some rules that exclude these or we are doomed hahah

[GOESA]

I found it guys ended up at 670/1700/452mhz , Had to mount a VF900cu to get it cold it was really hot, but now its fine, I think my scores suck a bit for the clocks. hmm

/Grau

[STEvil]

Rivatuner doesnt even show a shader bar for me, just core....

[zakelwe]

Rivatuner doesnt even show a shader bar for me, just core....

I've seen this with earlier version of the drivers with my 8800U so you might try a later nvidia driver if you are using the latest Rivatuner.

Regards

Andy

[GOESA]

Hey Guys got updates for you

22468
http://service.futuremark.com/compare?2k1=9330527

8315
http://service.futuremark.com/compare?2k3=5720787

Thats about max it does, hmm some know how to vmod this Asus card?

/Grau

[GOESA]

going from 1380 to 1700mhz in shader clock gave me about 300points in 3dmark03.

We need to compare memory timings I think, how do we do that?

/Grau

[zakelwe]

Hey Guys got updates for you

22468
http://service.futuremark.com/compare?2k1=9330527

8315
http://service.futuremark.com/compare?2k3=5720787

Thats about max it does, hmm some know how to vmod this Asus card?

/Grau

Scores added.

Being a fellow competitor and with the old British sense of fair play and sportsmanship here's a link to voltmodding the Asus

http://www.zen141854.zen.co.uk/ASUSVMGuide.htm


Note to all

I have added DigitalJesus as an example of how the remaining scores will look going down, it is too longwinded putting all other scores on.

Regards

Mr Lazybones

[Zeus]

Hey mate, that's the best step by step Vmod guide i've seen ever!

[GOESA]

Hmm zakelwe, nice one but seriously, iam quite a noob on vmods, so need this card to be the starting card in my vmod experience,

/Grau

[zakelwe]

Hmm zakelwe, nice one but seriously, iam quite a noob on vmods, so need this card to be the starting card in my vmod experience,

/Grau

Sorry couldn't resist(or) ...

Ok, whats the IC components on the back, one of those is likely to be the vgu mod and will more than likely be from ISL, Richtek or Nexsem etc. Ignore any ACT components and let us know the markings on the top and we can give you the pin to mod, in all probability.

When you have the leg to solder to then it's 20x the measured resistance to ground and then work downwards. That's the fools guide that I have been using for the last 5 years.

Now as for the Vmem mod for the Leadtek I hope Mr J.Guru will be as kind to me Coz I can't work it out Probably one of the 3 leg regulators on the board somewhere .....

Regards

Andy

[SpikeP]

I ordered my Leadtek 8400 GS TDH Extreme. What leadtek card is it you got Johnny, and what ns rating are the memory modules?

I doubt now mine will turn up tomorrow, but friday it is all go from me.

- Paul

[GOESA]

Damn my 7900GTO just died on me, hmm have RMA it, so have to use this 8400GS until I get the GTO back, Hope it does not take that long.

/Grau

[G H Z]

Hey Andy, I read your vmod guide, really great! Can you tell me what I must do differently on an EVGA?

[zakelwe]

Hey Andy, I read your vmod guide, really great! Can you tell me what I must do differently on an EVGA?

With those you are best reversing the polarity.

No, no, not the card, I mean the entire Earth!

Yes, that's how bad those cards are, 10x worse than an Asus.

he he ..

Regards

Andy (Leadtek Extreme owner -- UK Team )

[zakelwe]

I ordered my Leadtek 8400 GS TDH Extreme. What leadtek card is it you got Johnny, and what ns rating are the memory modules?

I doubt now mine will turn up tomorrow, but friday it is all go from me.

- Paul

Nice choice

Regards

Andy

[SandWiz]

Count me in too! I will try with MSI 8400GS... card should be here before weekend.

[zakelwe]

Count me in too! I will try with MSI 8400GS... card should be here before weekend.

Welcome aboard Sandwiz! Added to the first page!

1 post, comes from Finland ... hmmm, maybe a dark horse me thinks.

Regards

Andy

[STEvil]

Scores added.

Being a fellow competitor and with the old British sense of fair play and sportsmanship here's a link to voltmodding the Asus

http://www.zen141854.zen.co.uk/ASUSVMGuide.htm


Note to all

I have added DigitalJesus as an example of how the remaining scores will look going down, it is too longwinded putting all other scores on.

Regards

Mr Lazybones

CRUEL!!!

And here I was bouncing with glee that I wouldnt have to poke around to find the mod points (they're on the back on the IC's with like 16 legs) lol

[zakelwe]

CRUEL!!!

And here I was bouncing with glee that I wouldnt have to poke around to find the mod points (they're on the back on the IC's with like 16 legs) lol

Well got to admit that I have no idea whether an Asus or an EVGA or whatever is better or worse.

According to Rol-Co from the Dutch competition there are 3 types of PCB layout, I would imagine he knows all of them so PM him and I hope he does not mind helping out.

Or maybe he will post on this thread ? I'll ask him by PM.

Regards

Andy

[[XC] gomeler]

With those you are best reversing the polarity.

No, no, not the card, I mean the entire Earth!

Yes, that's how bad those cards are, 10x worse than an Asus.

he he ..

Regards

Andy (Leadtek Extreme owner -- UK Team )

Hey now, I like my little EVGA 8400GS She might not have the beefy PWM of the Asus but so far it's been good to 900MHz at 1.74vgpu Later today I'm going to toss 2.0v at it and see how it scales. Now if only the DDR2 didn't suck huge uhh soccer balls.

[hifiking]

I'm in.

[SpikeP]

Thanks zakelwe!

Just a quick heads up to say i didn't enter the contest twice (on the list twice on first post).

hehe, im only using one card!

- Paul