THis is my current Problem..

CPU Configuration E8400

Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting [8x]
FSB Frequency [500MHz]
FSB Strap To North Bridge [Auto]*
PCIE Frequency [110]
DRAM Frequency [Auto]*

DRAM Timing Control [Manual]
Primary Info; 5-5-5-15-4-42-6-4

Scondary Info; 8-4-5-4-6-4-6

Ive loosen the ram timings according to OCZ reaper PC2-8500 EPP profile.


DRAM Static Read Control [Auto]*
Ai Clock Twister [Auto]*
Transaction Booster [Auto]*
Relax Level [Auto]*
------------------------------------------ [CMOS setting] = effective value
CPU Voltage [1.5875v] = 1.275v = 1.256v loaded
CPU PLL Voltage 1.52v = 1.632v
North Bridge Voltage [1.47v] = 1.504v
DRAM Voltage [2.12v] = 2.208v
FSB Termination Voltage [1.22v] = 1.136v
South Bridge Voltage [1.075v] = 1.104v
Loadline Calibration [Enabled]
CPU GTL Refference [0.63%]
North Bridge GTL Reference [0.63%]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [ Auto]
DDR2 Controller REF Voltage [Auto]
SB 1.5v Voltage [1.55v] = 1.584v

Proc Stable as hell on small fft priority 8/9 as long as i dong mess with the FSB termination..
anything above it.. fails in 30 minutes orthos or fail to boot.
anything below it.. Hangs or failt to boot..

Rams Fails in 30secs and sometimes even last to 5 minutes on large fft orthos

any clues??