yeah noticed it and also.. i think this was the reason..Originally Posted by .OCX
so default is 1.2v for vcore with auto at 1.184 for fsb.
i always thought that vtt should be lower than vcore..
as far as i now
try imagine ..
i can get my proc to stable at vcoe 1.25v at 4ghz with vtt 1.216/1.232.....
but it makes the rams go nuts at whatever voltages/gtls i push on PLL, NB, DIMM,,... just cannot be done...
if i leave it to go higher than vcore.. i need to push the vcore to stabilize at 1.296v .. but then mem gets a random errors..
sometimes passes 30 minutes of orthos large fft .. and in another restart fails in 10secs.
new bios need them.
Reply With Quote
Bookmarks