Quote Originally Posted by cstkl1 View Post
dude i am asking for memtest 1000 percent stable at TRD 8 or TRD7

can u post ure settings and screenshot...

cause cant seem to do with this motherboard.

oh yeah i have a few team PC2-6400 CL3's , OCZ reapers PC2-8500
and a 500fsb capable proc..
only problem that on this board.. is difficult.

CPU Configuration E6750

Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting [8x]
FSB Frequency [500MHz]
FSB Strap To North Bridge [Auto]*
PCIE Frequency [111]
DRAM Frequency [Auto]*

DRAM Timing Control [Manual]
Primary Info; 4-4-4-12-3-42-6-3
CAS# Latancy [4]
RAS# To CAS# Delay [4]
RAS# Precharge [4]
RAS# Active Time [12]
RAS# To RAS# Dlay [Auto]
Row Refresh Cycle Time [Auto]

Scondary Info; 8-3-5-4-6-4-6
Read To Write Dely(S/D) [Auto]
Write To Read Delay(S) [Auto]
Write To Read Delay(D) [Auto]
Read To Read(S) [Auto]
Read To Read(D) [Auto]
Write To Write Delay(S) [Auto]
Write To Write Delay(D) [Auto]

DRAM Static Read Control [Enabled]*
Ai Clock Twister [Moderate]*
Transaction Booster [Disabled]*
Relax Level [0]*
------------------------------------------ [CMOS setting] = effective value
CPU Voltage [1.5875v] = 1.568v = 1.576v loaded
CPU PLL Voltage [1.52v = 1.632v
North Bridge Voltage [1.47v] = 1.504v
DRAM Voltage [2.14v] = 2.224v
FSB Termination Voltage [1.40v] = 1.472v
South Bridge Voltage [1.075v] = 1.104v
Loadline Calibration [Enabled]
CPU GTL Refference [0.63%]
North Bridge GTL Reference [0.63%]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [ Auto]
DDR2 Controller REF Voltage [Auto]
SB 1.5v Voltage [1.55v] = 1.584v

CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
-------------------------------
CPU Configuratins:
Virtualization = Disabled*
TM Mode = Enabled
C1E = Enabled
Ex Bit Disable = Enabled*
EIST = (Disabled by BIOS over certain FSB)

This is for the exact E6750 CPU in sig and can be changed to 7x for 3,5GHz by only lowering the vcore and CPU PLL to each

CPU Voltage [1.3875v] = 1.368v
CPU PLL Voltage [1.50v = 1.616v