I did the vMEM mod and at 1.95v loaded I can now do DDR2200+ 24/7 with 1.4ns Samsung timings (have Samsung chips on my card). I'll do the vGPU mod tomorrow and play a little with it. I'll really push it later on when I've bought tools for my Dremel to cut some old heatsinks to pieces.
Using an old stylograph and some silver glue I drew a line from one of the vMEM mod points. At the end of the line I made a little "pool" of silver glue by pushing the tip of the pen a little harder to the PCB. Then I hotglued the wire from the vRES in the right place making sure the exposed copper of the wire was dipping in the "pool" of silver glue. Afterwards I added another layer of glue to ensure proper conductivity of the connection.
I prefer silver glue over traditional soldering
Originally Posted by alexio
I did the vMEM mod and at 1.95v loaded I can now do DDR2200+ 24/7 with 1.4ns Samsung timings (have Samsung chips on my card). I'll do the vGPU mod tomorrow and play a little with it. I'll really push it later on when I've bought tools for my Dremel to cut some old heatsinks to pieces.
Reply With Quote
Bookmarks