-
just a little update on a few things i was worryed about earlier:
if you remember my issue about the Mosfet bolcks, and how i didnt feel that they were making very good contact to the center Mosfet chips.
so far no problems to report. i have been playing around with my CPU voltages and am now stable at a VCore of 1.7125 (I've now got a "Crazy red LED" on the mobo 
).
so if there was bad contact i dont think i would have got anyware near this voltage without seeing the dreaded "Blue Smoke" or a bunch of BSODs.
so im happy! 
one issue that im not sure of exactly what happened...
when i started overclocking hard (the cpu now runs doubble the speed of stock 
), one of my Ethernet Controllers stopped working! it said that "A cable is unplugged" but thanksfully theres two on the board and i just used the other one. but i have some further investigation to do on that.
Last edited by Exahertz; 01-19-2008 at 12:51 PM.
Current System Build
Designaton:
" Rad Hat "
__________________
- Mother Board, RAM and CPU:
Mobo: Asus Maximus Formula (SE) BIOS 1207 | CPU: Intel q9650 @ 3.80GHz Vcore 1.272v | RAM: Crucial Ballistix Tracer PC2 8500 4x1GB - Graphics Processor:
GPU: BFG 8800GTX | BFG 8600GT (Quad Monitor Setup) - Hard Drives:
RAID: 2x 74GB Raptors on RAID 0 for OS Drives
- Case and Power Supply:
Case: Antec Case | PS: OCZ ProXstreame 1000W - Water Cooling:
Pump: Swiftech MCP655-B | Rad: Dual Swiftech MCR320's | Fans: 6x Yate Loon D12SH-12's (W/ Variable RPM Rheostat) @ 88CFM Max Each - 528CFM Total!!! - (Water Blocks and Fittings):
CPU: D-Tek Fusion Block | GPU: Danger Den Full Coverage 8800 Block | Mobo: EK's Mosfet, NorthBridge and SouthBridge Blocks
Res: Swiftech Micro | Tee's: 4x MartinM's High Flow Copper Tee's | Elbow's: None | Y's: None
Flow Order: >> Rad's 1 & 2 in parallel > Res > Pump > CPU > GPU > SB > NB > Mosfet 1 > Mosfet 2 >>
Temperatures: CPU: 57°C Max, Running Prime95 | GPU: 58.3°C Max, Running 3Dmark | NorthBridge: Untested!
Last Updated 11/11/09
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks