Jinu117 SS Worklog (vapoli, UFO, etc)

[Creek Tha Gray]

I get strong suspicion unit's temp probe is at wrong location again... -_-;
Do you see any change in the bios temp that goes above 0c, etc? The evap temp you told me is right around where you would see positive temp from system monitoring to begin with I belive...

PS) I am still in CES so I will be kind of unavailable till end of week unless I happen to drop by like now Sorry... but it's hactic out here.

one first note %&%*^^& i want to be at CES

and second note there is no change in temp using any sytems monitors

will the K-type probe work better and what is the range i should see

i get paid in 2 days and will order one then.

any plz link to any info from you about your CES time


ok so here we go testing tonight is

with NB at 1.61volts cpu is at 1.55 volts
fsb is 390mhz or rated fsb of 1560mhz
cpu is at 3.9ghz stable occt at 30min
temp on cpu is some where equal or below -22c jin unit temp is at -22c during the test.
NB was at 21c for first 8min or load then down to 20c for the last 17min or load and room temp is 24.6c

the unit was at -22c and during load unit back down to -27c / -28c
in pc software showing -7 on first 2 cores and -14 on second 2 cores no change for compleate test.