we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[[XC] Oj101]

Then... Bloody hell!

[stunned_guy]

Hehe...gianni in action

Here are some really good dimms:



Yesterday I took off the HS now one of this dimms is dead
These are TCCD, do 245 @ 1.5-2-2-0 and 285 @ 2-3-3-0; but I could not took CL 2.5 and 3 with low voltage....for 200 mhz with 2.5-3-3-5 I need 3.03 volts !!!!!!!!!!!! I dont have any reason for this...

[Turrican]

my gskill tccd had the same "problem".

cl 2.5 and 3 was a no go, even at low or insane volts. they only worked with cl2

but luckily with 2-3-3-7 i got them to 275mhz.
very strange issue

[knopflerbruce]

Hehe...gianni in action

Here are some really good dimms:



Yesterday I took off the HS now one of this dimms is dead
These are TCCD, do 245 @ 1.5-2-2-0 and 285 @ 2-3-3-0; but I could not took CL 2.5 and 3 with low voltage....for 200 mhz with 2.5-3-3-5 I need 3.03 volts !!!!!!!!!!!! I dont have any reason for this...

Nice ram, shame one of them is dead. I'll try my G.skills tomorrow. Normally I bench on CH5, but it's fun to work with high freq's as well. Did 330mhz 2.5-4-3-7-1T spi1m once on those g.skills. No idea how that compares to 2-3-3-0 @ 285mhz, maybe you can tell.

I had a little fun with a 3500+ newcastle today. Didn't get the WR so I tried something else.

http://valid.x86-secret.com/show_oc.php?id=288523

272mhz the darn thing didn't want to run below 67mhz, instant freeze.

Oh, and S.I.H.

http://valid.x86-secret.com/show_oc.php?id=288531

[Turrican]

Nice ram, shame one of them is dead. I'll try my G.skills tomorrow. Normally I bench on CH5, but it's fun to work with high freq's as well. Did 330mhz 2.5-4-3-7-1T spi1m once on those g.skills. No idea how that compares to 2-3-3-0 @ 285mhz, maybe you can tell.

I had a little fun with a 3500+ newcastle today. Didn't get the WR so I tried something else.

http://valid.x86-secret.com/show_oc.php?id=288523

272mhz the darn thing didn't want to run below 67mhz, instant freeze.

Oh, and S.I.H.

http://valid.x86-secret.com/show_oc.php?id=288531

nice one bruce.

rofl @ newcastle 3500+

[socket]

And oldest K8 on the way, 0235.

200MHz on 3500+
and one joke valid: http://valid.x86-secret.com/show_oc.php?id=283459
sorry for OT
lol i can search:
http://valid.x86-secret.com/show_oc.php?id=194410

[CCUABIDExORxDIE]

tccd loses normal cas2.5 and cas3 performance when given too much volts...save the high volts for bh-utt/5/ch-utt. it runs WAY tighter subtimings too.

[stunned_guy]

That is my problem I cant run this sticks with 2.5 or 2.6 volts...

@ bruce
Dammned this was my record Which stepping ? You did some more mhz than my result.

I cant tell you the real differences between 330 @ 2.5-4-3-5 and 285 @ 2-3-3-0 because i cant test that yet. But i believe that it will aproximatelity the same.

[knopflerbruce]

That is my problem I cant run this sticks with 2.5 or 2.6 volts...

@ bruce
Dammned this was my record Which stepping ? You did some more mhz than my result.

I cant tell you the real differences between 330 @ 2.5-4-3-5 and 285 @ 2-3-3-0 because i cant test that yet. But i believe that it will aproximatelity the same.

Stepping: CBBHD 0450TPAW. I think I can get above 3.4ghz with more voltage but I'm not ready to kill it just yet, want some spi32m/wprime1024m results first

[MR.Q]

I had a little fun with a 3500+ newcastle today. Didn't get the WR so I tried something else.

http://valid.x86-secret.com/show_oc.php?id=288531

Wow, that's a nice clock there on the winny.

I have a winny 3500+ which does 3116mhz on chilled water (2c) with 1.68vcore. I'll look out the stepping in a while, and post a cpuz verification for the hell of it

Not quite upto the standards of you guys but hey, we gotta try right?

[knopflerbruce]

Wow, that's a nice clock there on the winny.

I have a winny 3500+ which does 3116mhz on chilled water (2c) with 1.68vcore. I'll look out the stepping in a while, and post a cpuz verification for the hell of it

Not quite upto the standards of you guys but hey, we gotta try right?

Thanks Your chip may be a nice one if it's not too coldbugged.

Max FSB on a 3500+ LBBLE 0515EPAW: http://valid.x86-secret.com/show_oc.php?id=289136 on air, 1.7v and 50c idle

And T.I.H: http://valid.x86-secret.com/show_oc.php?id=289136
Not too impressive, but almost no competition made it quite easy. Especially since I don't mind trying 1.9v on my chips, no matter what temps

That FX57 ES was quite nice (for an ES). http://valid.x86-secret.com/show_oc.php?id=289135

Not sure if it was coldbug or just the chip that maxed out there, no idea why I didn't try some other stuff.

[gianni-gt]

you've posted the wrong linkt about your sempron.... correct: http://valid.x86-secret.com/show_oc.php?id=289134

[knopflerbruce]

you've posted the wrong linkt about your sempron.... correct: http://valid.x86-secret.com/show_oc.php?id=289134

Hehe, thanks Too tired to notice I guess...

[gianni-gt]

i've prepared my openair-sys for today... but it's +5°C

[Turrican]

i've prepared my openair-sys for today... but it's +5°C

hehe, we have now already -7°C. this is going to be cold tonight
yesterday max. -15°C

[[XC] Oj101]

nice, but is no sandiego... i have to check the database for the highest validated htt

Here's my 411MHz Sandy 3700MHz
http://valid.x86-secret.com/show_oc.php?id=288118

[gianni-gt]

my openair session of today was not really successfully. outside temp 4°C, cooler temp 10°C.

http://valid.x86-secret.com/show_oc.php?id=289492

Pi-stable: 3387mhz@1.52v

setup:

[Turrican]

hope it gets colder, for your next try

[knopflerbruce]

I thought my Opty 154 was crappy, but I thought I should give it a try... And OMFGZZZZZ!!!! S.I.H.!

Opteron 154 wr, and Opteron overall WR, and s939 locked multi WR as well:

http://valid.x86-secret.com/show_oc.php?id=289541

This thing was so hot I had to use a pot (normally I use a heatsink with dice on it for B1 chips and other coldbugged stuff), but it worked nicely. -15c/1.824v. temps measured in ITE SmartGuradian, as the temp sensor crapped out at 2c.

[Trunks]

I thought my Opty 154 was crappy, but I thought I should give it a try... And OMFGZZZZZ!!!! S.I.H.!

Opteron 154 wr, and Opteron overall WR, and s939 locked multi WR as well:

http://valid.x86-secret.com/show_oc.php?id=289541

This thing was so hot I had to use a pot (normally I use a heatsink with dice on it for B1 chips and other coldbugged stuff), but it worked nicely. -15c/1.824v. temps measured in ITE SmartGuradian, as the temp sensor crapped out at 2c.

Omg that is tha golden one!!
Whats the stepping?

[gianni-gt]

WTF!!!! congratz... you have to try with better cooling...

any superpi scores?

[socket]

That FX57 ES was quite nice (for an ES). http://valid.x86-secret.com/show_oc.php?id=289135

Not sure if it was coldbug or just the chip that maxed out there, no idea why I didn't try some other stuff.

very nice ES

[stunned_guy]

What the hell !!!! That opteron is amazing, bruce
Where did you get that opterom from ? Which stepping ?

@ Oj101
Nice HTT for an San Diego on the ATI chipset

[gianni-gt]

ok, i think when bruce uses dice he gets a bit better temps in norway than me here in the south

[Turrican]

I thought my Opty 154 was crappy, but I thought I should give it a try... And OMFGZZZZZ!!!! S.I.H.!

Opteron 154 wr, and Opteron overall WR, and s939 locked multi WR as well:

http://valid.x86-secret.com/show_oc.php?id=289541

This thing was so hot I had to use a pot (normally I use a heatsink with dice on it for B1 chips and other coldbugged stuff), but it worked nicely. -15c/1.824v. temps measured in ITE SmartGuradian, as the temp sensor crapped out at 2c.

wow, that results are awesome for an opti