Saaya, how can check mem without taking heatsink off?
Saaya, how can check mem without taking heatsink off?
"Fanbouyism is a disease we all carry but most have immune systems that keep it at bay. However when coupled with a bad dose of ignorance and Low IQ numbers, this disease can be accelerated out of control to boast insane amounts of irradic, Defensive, or Aggressive behaviour and unexplainable devotion to a product or label whether or not that item is truly deserving" -DR Ima Noober, June 1, 2003
Asus P5QL-Pro
Kinston HyperX 4x2 gigs 5-5-515@ 1120 mghz
Q6600 - 3.33 GHZ
2x Sapphire 4870 1 gig
Galaxie 850 PSU- this thing rocks
audigy 2zs gamer
4x Freezones to cool Proc. Idle @ 10c- Full load @29c(soon to be 5x in my new twelve hundred case)
Vista ultimate 64
dont think thats possible... well maybe theres something about this in the bios... some hint or note what chips are used... not sure how to find it in case it exists. the metal plate on the mem on my card is glued with a stick tape, but after heating it up with a hairdryer i could slowly pull it off bit by bit.Originally Posted by MsB
same as mine!!! you will LOVE it trust me
THe mem on this card is awesome!
Let me know how far you can go!
Hmm Sapphire using different mem..
Maze4 fit fine, testing now..
MB Reviewer for HWC
Team OCX Bench Team
sure saaya.....since now I just installed on the mobo (DFI X38) for a review....and they run stock speed...all I have to say they're really cool....about 30-32 deg @ idle after a 3dmark....stock cooling....
same as mine!!! you will LOVE it trust me
THe mem on this card is awesome!
Let me know how far you can go!
will go for water cooling later
Tonight I'll check frequency for a small clock-session
is it right if I use the automatic test inside CCC to determine max freq. ?
no signature at the moment....
in progress...
had some test tonight...having both cards installed but Crossfire disabled.1st card is gonna work at about 800/1040.....mhz +-
same as mine!!! you will LOVE it trust me
THe mem on this card is awesome!
Let me know how far you can go!
just tested with atitool and some 3dmark01 session....
seems not bad for GPU, quite low for mem...
unfortunately ati tool recognizes second card, but if you set GPU @....some frequency, then after yuo press apply or ok, ti automatically gets back to his default....
no signature at the moment....
in progress...
im sure you will notice for crysis and other demanding games you cant run 800 gpuhad some test tonight...having both cards installed but Crossfire disabled.1st card is gonna work at about 800/1040.....mhz +-
just tested with atitool and some 3dmark01 session....
seems not bad for GPU, quite low for mem...
unfortunately ati tool recognizes second card, but if you set GPU @....some frequency, then after yuo press apply or ok, ti automatically gets back to his default....
what happens at memclocks above 1040? you gt artifacts? in 2k1?
well rivatuner works fine for me so why should i fight with atitool to get it working?
hello peeps, i got a sapphire 3850 512mb and gpuz says
bios version: VER010.071.000.000.000000
which i think it's 'unlocked'
so if somebody wants it i can upload it
i don't know what mem chips are on it tho, haven't removed the hs yet
hello peeps, i got a sapphire 3850 512mb and gpuz says
bios version: VER010.071.000.000.000000
which i think it's 'unlocked'
so if somebody wants it i can upload it
i don't know what mem chips are on it tho, haven't removed the hs yetthanks santa!
capftp, well dont you bench far cry?
i don't really know, i've read that xxx.071.xxxx bios and up are 'unlocked'?
anywayz, here you go
edit: went by this post http://www.xtremesystems.org/forums/...8&postcount=16
Last edited by spectrum48; 12-21-2007 at 12:01 PM.
Sapphire uses Qimonda and why do you say it is unlocked? I cant seem to figure out how to oc this card hardly at all.hello peeps, i got a sapphire 3850 512mb and gpuz says
bios version: VER010.071.000.000.000000
which i think it's 'unlocked'
so if somebody wants it i can upload it
i don't know what mem chips are on it tho, haven't removed the hs yet
1) CCC only allows to 720Mhz
2) ATI tool crashes the system if I oc even 1 mhz (beta 4)
3) Riva says the driver is not supported:
Therefore only low level tweeks available:
Grrrr
MB Reviewer for HWC
Team OCX Bench Team
you can OC the card by click on that low-level system settings
Therefore only low level tweeks available:
Grrrr
E3110@3.6Ghz || Gigabyte P45-DS3 || 2GB Cellshock 6400 || Asus HD4850||
im sure you will notice for crysis and other demanding games you cant run 800 gpu
what happens at memclocks above 1040? you gt artifacts? in 2k1?
well rivatuner works fine for me so why should i fight with atitool to get it working?
i dont' play...just bench...
ram@1040 are really on the borderlimit....but I have to test again...was too tired yesterday to test as I should.
I think I'll put one card at a time and clock it...then see if i can flash and run them in CF
no signature at the moment....
in progress...
Posting Permissions
Reply With Quote
Bookmarks