Quote Originally Posted by Id034 View Post
working on Ace's settings for 4.4...but this chip needs 0.025 more vcore, that's a little disappointment since 4 ghz were done so easy with 1,3775
Tried to play with ICHio an CPUvtt but has no effect in this board...


With this vcore my temps benching with wprime 1024 test were too high for a 24/7 use, 77,76,70,69 this is everest read...
can you tell me if there's some differences of temps between coretemp 95.6 and everest?
try increasing your ICHIO to 1.7 and MCH up to 1.56...also, put your memory into 1:1 and loose timings 5-5-5-15-42..or leave it in auto but make sure the timings are loose after getting to the desktop.

increase your CPU GTLREF to either 69% or 70%...AND CPU VTT to around 1.20...set these voltages using Uguru...bios is not accurate with vcore and a few other settings.

if all fails, i suspect your water cooling system is not keeping up with cooling the cpu when doing the 1024M bench.