ASUS Maximus Formula SE

[ninogui]

Could somebody tell me the secret to the 9 series bios

902 was a complete disaster
903 will not post unless I use STOCK settings

Flashing with EZ Flash, load my oc profile and the bugger does is sit there on det ram, power off then back on and hit f2 to load default and it works.
Reboot and load my settings ( auto or manual ) and it wont boot, same thing det ram...
besides a very large hammer, anybody got some other ideas?

Hi finger

Well i´ve been testing ram a lot of notches up and down, and concluded everytime the lcd hangs on det ram is in fact all ram settings issues, not cpu settings, and probably not nb too, if its not too much out of spec.

for time being im settling on 3.4ghz for day to day, on

cpuvolt 1,40625
pll 1,58 (testing 1,52)
nb 1,49
fsbt 1,40
sb 1,050

and my rams are at 14-5-5-5 2.1v pc1133 strap auto, clocktwister strong, static read enable and trans.booster enable (0), with vdram at ddr2-ref. with memtest performance set to 6 (1 notch down) my everest values are read 9732, write 7729, copy 8608, latency 51.8

my temps are stable and not too bad for a vid 1.2875, range from 37-61,62.


dont wanna push the rams too hard, but prob your issue is ram.