Custom Powdercoated Orange outside, Black inside.
A few various cuts around the case, window panel.
Nice ChilledPC Thermochill grill on top too
Bulgin switches!
Custom Powdercoated Orange outside, Black inside.
A few various cuts around the case, window panel.
Nice ChilledPC Thermochill grill on top too
Bulgin switches!
Chilled PC UK - Watercooling Parts, Any Custom work undertaken including Laser Cutting (any parts, grills, side panels, brackets etc), Anodising, Powdercoating , Custom Spraying and Airbrushing, Fabrication, Watercooling Installs and more all done to the highest standard.
International shipping no problem, even on Cases!
Custom Anodised Red Black outside, Black powdercoat inside.
Fully watercooled P5k, mosfets+chipsets on a PA120.1
CPU and Graphics on a PA120.3 mounted in the roof.
Dual Tribal Overkill RES
Custom modded Yate Loons with RED LEDs
Laser Cut side panel with a dragon design.
Chilled PC UK - Watercooling Parts, Any Custom work undertaken including Laser Cutting (any parts, grills, side panels, brackets etc), Anodising, Powdercoating , Custom Spraying and Airbrushing, Fabrication, Watercooling Installs and more all done to the highest standard.
International shipping no problem, even on Cases!
Custom Anodised Green Black outside with pre-polish, Black powdercoat inside.
Laser Cut side panel with a dragon design.
Chilled PC UK - Watercooling Parts, Any Custom work undertaken including Laser Cutting (any parts, grills, side panels, brackets etc), Anodising, Powdercoating , Custom Spraying and Airbrushing, Fabrication, Watercooling Installs and more all done to the highest standard.
International shipping no problem, even on Cases!
WOW, I like !!!(borat voice)
OMFG
Geif the green one!! SO COOL!!!!
Very nice Tom, I might let u do such mods for me, cheers!
• DFI Lanparty LT X48-T2R
• Intel Q6600 L737B242 ~ VID 1.2125 ~ 4000mhZ @ 1.48 vcore {lapped}
• eVGA 8800GTS (G92) 512MB {stock}
• Crucial Ballistix PC8500 Tracer ~ 1200mhZ 5-5-5-12 @ 2.05v
• Lian Li PC-V1000 {modded}
• Corsair HX 620W
• Creative X-FI ExtremeMusic
• Western Digital Raptor X 150GB
• Thermalright-Ultra120 Xtreme {lapped} ft. Scythe S-Flex SFF21F S-FDB ~ Push & Pull
Working hard i see duder ! looking cool as ...
Hark children of the Resolution !!
can you tell me what kind of paint/technique is used on the black inside of this one? i'm waiting for my A05B to arrive and this black interior is awesomeOriginally Posted by welshtom
Custom Powdercoated Orange outside, Black inside.
A few various cuts around the case, window panel.
Nice ChilledPC Thermochill grill on top too
Bulgin switches!
The orange one is sick!!!!
Do you ship 2 Australia mate?
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
that orange/black is quite sexy
Love the orange!
I really like that anodizing work, very nice looking. And a wc'ed SB, now that's extreme! Heck, you might as well throw that in the loop while you're at it
I love custom painted cases, and investment that never gets outdated.
they look great, love the dragons
D4rkn3ss, its powdercoat
XS WCG Rules: #1: don't pull fart_plume's finger #2: Dave aka Movieman, don't give him your phone number if you like your hearing
XS WCG Note: There are 2 sets of points, WCG and Boinc. WCG = 7x Boinc
Project: Dark Matter (<- link) - Asus Maximus II Formula, Intel X3330 3.4ghz @1.32v under load, corsair ddr2 1066 8gigs, evga gtx260 core 216, pc p&c 750W, EK Supreme HF Nickel, iandh 175 res, Swiftech MCP355, Black Ice GTX G2 240, Lian Li v1200b
silverstone tj07 build log
heh thanks 64dragon! i done a google search and find a place in my city, a small town on south of brazil who do this kind of job (powdercoat, powderpaint and electrostatic painting)! is actualy the same place i use to re-do the bluing of some of my guns!
Thanks for the good comments
I'd forgotton to post these on here, been so busy!!
I was a bit dubious when I was asked to do the orange one, but it is probably the nicest colour we've done.
I wanted to keep it
Chilled PC UK - Watercooling Parts, Any Custom work undertaken including Laser Cutting (any parts, grills, side panels, brackets etc), Anodising, Powdercoating , Custom Spraying and Airbrushing, Fabrication, Watercooling Installs and more all done to the highest standard.
International shipping no problem, even on Cases!
Very nice work dude D=
[ build in progress ]
Q9450, P5Q-Pro, 4Gb TeamXtreem Dark + 4gb Buffalo Firestix 1066, Silverstone DA650, Silverstone TJ09, 2×WD6400AAKS Raid0, 2× Sapphire HD4870, Dell 2407WFP-HC.
Liquid:
loop1: EK Supreme, MCW30, PA120.2, DDC3.2+XSPC top
loop2: 2×MCW60, D5 vario, MCR320
you do that paintjob yourself?
Silverstone modded SG03
Intel Q6600 w/ Zalman FS-C77
BFG 8800GT
G.Skill 2x2 GB
Corsair HX520W Modular PSU
Foxconn M7VMX-K
WD 400 GB SATA HD
Logitech G15, MX Revolution, X-230
Razer Barracuda 7.1 sound card, Razer Exactmat
How did you achieve the splatter effects on the cases? Did you just throw paint at them?
Love the orange one.
Very nice work.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
wow, excellent paint jobs.
i've started to like the G70 more and more latley. I like its simple look but massive interior
I'm wondering this as well!! I love them all!!How did you achieve the splatter effects on the cases? Did you just throw paint at them?
Core
Core i7 920
eVGA X58 LE SLi
2x3GB Mushkin DDR3-1600
BFG 8800GT OC
Seagate 7200.12 1TB + Maxtor 320GB
LianLi A05B
Cooling (all internal)
2x BI GTS 360
2x DDC3.2 + Ek top
EK Supreme LT
The orange case is beautiful. Oh man it is so beautiful.
-
"Language cuts the grooves in which our thoughts must move" | Frank Herbert, The Santaroga Barrier
2600K | GTX 580 SLI | Asus MIV Gene-Z | 16GB @ 1600 | Silverstone Strider 1200W Gold | Crucial C300 64 | Crucial M4 64 | Intel X25-M 160 G2 | OCZ Vertex 60 | Hitachi 2TB | WD 320
Wow, beautiful work! I'm really happy with my G70, it has been a great case for me.
In Bailout America, bank robs YOU
Gigabyte EX58-Extreme Bios F5h
i7-920 @ 190x20 HT on Turbo on
6 GB OCZ XMP Ready DDR3-1600
300GB Velociraptor (OS)- 2x250GB WD (storage)
EVGA 8800GTX
Samsung 2433BW 24" LCD - X-fi Platinum
Iwaki RD30 24v pump/Meanwell 150 power supply
Swiftech GTZ, PA 120.3, MCW60, Enzo chipset block
Vista Business 64bit
PCPC Silencer 750W PSU
welshtom I wonder if you could help me? at the front of the case is room for a 120mm fan / pa120.1. If you removed the floppy trays just above do you think you could get a 2nd 120mm fan in there / pa120.2?
or if someone else could help then that would be amazing
Posting Permissions
Reply With Quote
Bookmarks